Bosch HBE5453UC Installation Instructions 1 - Page 6

Dimensions and Cabinet Requirements

Page 6 highlights

Dimensions and Cabinet Requirements Appliance Dimensions ʌ¼ʓʘ  ê  ʌ¼ʚ  é  è¼ʚ  ʌ¼ʚ       PP Cabinet Dimensions General Cabinet Requirements All models require: ▯ ¼" (6.4 mm) space between the side of the appliance and an adjacent wall or cabinet door when installed at the end of a cabinet run. ▯ The cabinet base must be flat and capable of supporting a weight of at least 150 lbs (68 kg). Unit under the counter *** This part of furniture must be present, straight and have no gap with the lateral parts. The minimum height is 3/8" (9 mm). If the built-in oven is installed underneath a cooktop, pay attention to the installation instructions of the cooktop. Wall mounted unit   è¼ʓʘ  ëê    PP   è¼ʓʘ     * For wall installations, the junction box may be located above or below the unit within reach of the power conduit.  ëé PP * Includes _" (19 mm) base plate ** For singel ovens installed under a countertop, the junction box may be located to the left, or the right of the unit, within reach of the power conduit. 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

6
Dimensions and Cabinet Requirements
Appliance Dimensions
Cabinet Dimensions
General Cabinet Requirements
All models require:
¼" (6.4 mm) space between the side of the appliance
and an adjacent wall or cabinet door when installed at
the end of a cabinet run.
The cabinet base must be flat and capable of
supporting a weight of at least 150 lbs (68 kg).
Unit under the counter
If the built-in oven is installed underneath a cooktop, pay
attention to the installation instructions of the cooktop.
Wall mounted unit
*
Includes
_
" (19 mm) base plate
**
For singel ovens installed under a countertop, the
junction box may be located to the left, or the right
of the unit, within reach of the power conduit.
*** This part of furniture must be present, straight and
have no gap with the lateral parts. The minimum
height is 3/8” (9 mm).
*
For wall installations, the junction box may be
located above or below the unit within reach of the
power conduit.