Bosch HBL8453UC Use and Care Manual - Page 21
Software Update, Information on Data Protection, Wi-Fi, Module
View all Bosch HBL8453UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Connect to App If the Home Connect app is installed on your mobile device, you can connect it to your oven. Note: The appliance must be connected to the network. 1. Press the Settings touch button repeatedly until "HOME CONNECT SETUP" is displayed. 2. Press Enter. "PRESS ENTER FOR HC" is displayed. 3. Press Settings repeatedly until "CONNECT TO HC APP" is displayed. 4. Press Enter. "CONFIRM ON HC APP" is displayed. 5. Confirm the connection on your Home Connect app. Remote control You can use the Home Connect app to easily access the functions of your oven. Notes ▯ Operating the appliance directly from the oven always has priority. During this time, it is not possible to operate the oven using the Home Connect app. ▯ The remote control is already activated when you connect your oven. ▯ If the remote control has been deactivated, only the oven's operating statuses will be displayed in the Home Connect app. ▯ The remote control is automatically activated when the remote start is activated. 1. Press the Settings touch button repeatedly until "HOME CONNECT SETUP" is displayed. 2. Press Enter. "PRESS ENTER FOR HC" is displayed. 3. Press the Settings touch button repeatedly until "REMOTE CTRL DISABLED" or "REMOTE CTRL ENABLED" is displayed. 4. Press Enter. 5. "PRESS 1 REMOTE CTRL ON" or "PRESS 0 REMOTE CTRL OFF" is displayed. Press "1" or "0" to switch Remote Control on or off. Software Update Using the software update function, your oven's software can be updated (e.g. for the purpose of optimization, troubleshooting or security updates). To do this, you need to be a registered Home Connect user, have installed the app on your mobile device and be connected to the Home Connect server. As soon as a software update is available, you will be informed by the Home Connect app, from which you will also be able to download the update. Once the update has been successfully downloaded, you can start installing it via the basic settings of your oven, or the Home Connect app if you are on your local area network. The Home Connect app will notify you once installation is complete. Notes ▯ You can continue to use your oven as usual while updates are downloading. ▯ Depending on your personal settings in the app, software updates can also be set to download automatically. ▯ We recommend that you install security updates as soon as possible. Information on Data Protection When your appliance is connected to a WLAN network that is connected to the Internet for the first time, your appliance transmits the following categories of data to the Home Connect server (initial registration): ▯ Unique appliance identification (consisting of appliance codes as well as the MAC address of the installed Wi-Fi communication module). ▯ Security certificate of the Wi-Fi communication module (to ensure a secure data connection). ▯ The current software and hardware version of your appliance. ▯ Status of any previous resetting to factory settings. This initial registration prepares the Home Connect functions for use and is only required when you want to use these Home Connect functions for the first time. Note: Ensure that the Home Connect functions can be used only in conjunction with the Home Connect app. Information on data protection can be accessed in the Home Connect app. Wi-Fi® Module FCC/IC Statements Model: COM2 FCC ID: 2AHES-COM2 IC: 21152-COM2 The Home Connect module is a communication device designed to provide communication between appliances and smart devices. This module is integrated at the factory, under direct control of BSH Home Appliances Corporation, and is not user servicable or upgradable. At least 77/8 inch (20 cm) separation distance should be maintained from device to user. FCC COMPLIANCE STATEMENT 9 CAUTION Changes or modifications not expressly approved could void your authority to use this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. 21