Bosch HGS7282UC Instructions for Use - Page 15
The Select Functions
UPC - 825225843955
View all Bosch HGS7282UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
4. Press Time and the clock is now set. Getting Started Note: If operation is not completed, the oven will beep periodically as a reminder to set clock time. Press OFF. Changing the Clock 1. Press Time. TIMER 1 flashes in display. 2. Turn knob to select CLOCK. 3. Press Time and hour digits flash. 4. Turn knob to change hours. 5. Press Time again and minute digits flash. 6. Turn knob to change minutes. 7. Press Time again and the clock is set. 1 2 Time Cooking Mode Temperature Start Note: To cancel the TIME selection when setting the clock, press OFF at any time while in the clock mode. The Select Functions Menu SELECT FUNCTIONS is the section of the menu where you can set or change the range features listed below. To access the SELECT FUNCTION menu 1. Press and hold COOKING MODE press pad for five (5) seconds. SELECT FUNCTION is displayed. 2. Turn knob slowly to desired feature. There will be a slight delay before each message (or feature) can be seen in the display. Turn knob slowly and wait approximately one second for display to show next feature. 3. Press START to choose the function. 4. Turn knob to desired setting and press START. When all settings for the function are complete, SELECT FUNCTION flashes again. 5. Press OFF to exit the Select Functions Menu. Change the Beep Volume The volume of the control beep can be changed from LOW (softest) to HIGH (loudest). The control default for beep volume is Medium. 1. Access SELECT FUNCTIONS Menu. 2. Turn knob clockwise until VOLUME is displayed. 3. Press Start. 4. Turn knob to select volume level Low, Medium or High. 5. Press Start. Change the Temperature Scale The oven has been preset to the Fahrenheit temperature scale. The feature allows you to switch between Fahrenheit and Celsius temperature. 1. Access SELECT FUNCTIONS Menu. 2. Turn knob clockwise until SELECT TEMP F-C is displayed. 3. Press Start. 4. Turn knob to select Fahrenheit (F) or Celsius (C). 5. Press Start to accept new selection. Turn Clock Display ON or OFF Clock time display can be turned off. The default display is on. 1. Access SELECT FUNCTIONS Menu. 2. Turn knob clockwise until CLOCK DISPLAY is displayed. 3. Press START. 4. Turn knob to select ON or OFF 5. Press START to accept new selection. English 13