Bosch HIB82651UC Use and Care Manuals - Page 8

Switching off audible signal ▯ Press and hold the "Light" button for 5 seconds. ▯ "Snd" appears on the display panel for 3 seconds. Overheating protection The appliance is equipped with overheating protection. If high temperatures are measured on the appliance, the appliance switches automatically to the highest ventilator setting until the temperature drops again. ▯ If the hood is switched on, the highest ventilator setting is set. If the temperature drops again, the appliance switches back to the previously-selected ventilator setting. ▯ If the hood is switched off, the appliance switches automatically to the highest ventilator setting. If the temperature drops again, the appliance switches off automatically. ▯ While the overheating protection is active, "Auto" appears on the display panel. The ventilator setting cannot be reduced in this time. Cleaning and maintenance 9 WARNING WARNING To avoid risk of fire and explosion do not use flammable liquids or solvents. Always unplug or disconnect the appliance from the power supply before servicing. Do not use steam cleaners to clean the appliance. Hidden surfaces may have sharp edges. Use caution when reaching behind or under appliance. 9 WARNING RISK OF BURNS The appliance will become hot when in use, especially in the area surrounding the bulbs. Let cool before cleaning. 9 WARNING RISK OF ELECTRIC SHOCK Penetrating damp can cause electric shock. Only clean appliance with a damp cloth. Prior to cleaning, pull the plug or flip the breaker in the fusebox. Cleaning agents To prevent various surfaces from becoming damaged due to incorrect cleaning agents, follow the specifications given in the table. Do not use ▯ cleaning agents that are harsh or scouring, ▯ cleaning agents with high alcohol content, ▯ hard scouring pads or sponges, ▯ high-pressure cleaners or steam cleaners. Thoroughly rinse all new sponges before use. Observe all instructions and warnings accompanying cleaning agents. Area Stainless steel Varnished surfaces Aluminum and plastic Glass Controls Cleaning agents Warm soapy water: Clean with a dish rag and dry with a soft towel. Only clean stainless steel with the grain. Specific products for stainless steel care are available from customer service or from specialized retailers. Apply a thin layer of the care product with a soft cloth. Warm soapy water: Clean with a damp dish rag and dry with a soft towel. Do not use stainless steel cleaner. Glass cleaner: Clean with a soft cloth. Glass cleaner: Clean with a soft cloth. Do not use a glass scraper. Warm soapy water: Clean with a damp dish rag and dry with a soft towel. Risk of damage to electronics due to permeating damp. Never clean controls with a wet cloth. Do not use stainless steel cleaner. 8