Bosch NBC-255-P Operation Manual - Page 16

Network and power connector

Get Bosch NBC-255-P PDF manuals and user guides View all Bosch NBC-255-P manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

16 en | Installation IP Camera 200 Series 3.2 Network (and power) connector 1 2 3 4 I/O Line-out DC12V Reset Ethernet Line-in Figure 3.2 Network connection - Connect the camera to a 10/100 Base-T network. - Use a shielded UTP Category 5e cable with RJ45 connectors. - Power can be supplied to the camera via the Ethernet cable compliant with the Power-over-Ethernet (IEEE 802.3af) standard. Note: The camera can accept power from both the DC12V power input and the Ethernet input at the same time. The primary source is the DC12V input. If both are connected and DC power removed, the camera will reboot and will then be powered by PoE. If both are connected and the PoE removed, the camera will continue working. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
16
en | Installation
IP Camera 200 Series
AR18-09-B003 | v1.1 | 2010.05
Installation and Operation Manual
Bosch Security Systems
3.2
Network (and power) connector
Figure 3.2
Network connection
–
Connect the camera to a 10/100 Base-T network.
–
Use a shielded UTP Category 5e cable with RJ45
connectors.
–
Power can be supplied to the camera via the Ethernet
cable compliant with the Power-over-Ethernet
(IEEE 802.3af) standard.
Note:
The camera can accept power from both the DC12V power
input and the Ethernet input at the same time. The primary
source is the DC12V input. If both are connected and DC power
removed, the camera will reboot and will then be powered by
PoE. If both are connected and the PoE removed, the camera
will continue working.
1 2 3 4
DC12V
Ethernet
Line-out
Reset
Line-in
I/O