Bosch NBC-255-P Operation Manual - Page 77
JPEG Posting
View all Bosch NBC-255-P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
IP Camera 200 Series Advanced Mode | en 77 setting 0.0.0.0 the encoder for the stream operates in multiunicast mode (copying of data stream in device). The camera supports multi-unicast connections for up to five simultaneously-connected receivers. Duplication of data places a heavy demand on the CPU and can lead to impairment of the image quality under certain circumstances. Port Enter the port address for the stream here. Streaming Click the checkbox to activate multicast streaming mode. An activated stream is marked with a check. (Streaming is typically not required for standard multicast operation.) Multicast packet TTL A value can be entered to specify how long the multicast data packets are active on the network. If multicast is to be run via a router, the value must be greater than 1. 6.8.4 JPEG Posting Save individual JPEG images on an FTP server at specific intervals. If required, retrieve these images at a later date to reconstruct alarm events. JPEG resolution corresponds to the highest setting from the two data streams. File name Select how file names are created for the individual images that are transmitted. - Overwrite: The same file name is always used and any existing file will be overwritten by the current file. - Increment: A number from 000 to 255 is added to the file name and automatically incremented by 1. When it reaches 255, it starts again from 000. - Date/time suffix: The date and time are automatically added to the file name. When setting this parameter, ensure that the date and time of the device are always set correctly . For eample, the file snap011005_114530.jpg Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05