Bosch SHE55M15UC Instructions for Use - Page 18

Additional Features The options listed below vary by models. Extra Dry Heat With this option you can raise the temperature of the rinse water and increase the drying time for improved drying. This option is only for units with a display. If your unit has a display window, please follow the instructions below. NOTE: The unit must be powered OFF before activating. To activate: • Press and hold the left "Cancel Reset" button, then press and hold the ON/OFF button. Cancel DRreasient • When the LED display window indicates a "0" or "1" release both buttons. • To activate extra dry heat, press the left "Cancel Reset" button until the display indicates "1". • To disable extra dry heat, press the left "Cancel Reset" button until the display indicates "0". • Press the ON/OFF button to save the setting. Child Lock The child lock feature allows you to disable the dishwasher control panel to prevent accidental program changes. To activate: • Press and hold the button labeled "Child Lock" for 4 seconds. The child lock indicator will illuminate. To disable: • Press and hold the "Child Lock" button for 4 seconds. OptiDry™ This feature senses when the unit is low on rinse agent and automatically increases the drying time. For best performance, always use a liquid rinse agent even if your detergent contains a drying additive. Cycle Completion Signal The cycle completion signal alerts you when a cycle completes and the dishwasher has washed and dried the dishes. You can choose to disable the tone or adjust the volume. NOTE: The unit must be powered OFF before activating. To activate: • Press and hold the right "Cancel Reset" button then press and hold the On/Off button. • When the light on the "Cancel Reset" button you are pressing illuminates and the tone goes off, release both buttons. • Press the far right "Cancel Reset" button until you achieve the desired volume or until there is no tone (to turn off ). • Press the ON/OFF button. The setting is now saved. Countdown Display The countdown display indicates the time remaining for a cycle to complete. The time will change based on water temperatures and control settings. Sanitized Indicator When the "Sanitized" indicator light illuminates on the control panel (or Sanitized symbol appears in models with a display) , it means that the dishware and kitchenware that were just washed have been sanitized according to the requirements of the National Sanitation Foundation (NSF). For more information on NSF certification, go to the Wash Cycle Information section of this manual. Refill Rinse Agent Indicator An indicator light will illuminate to alert you when more rinse agent is required. For models with a display window, the display will show . InfoLight™ Red LED illuminates the floor to indicate that the dishwasher is running. 18