Bosch SHE5AL06UC Use and Care Guide - Page 13
She4am1, Operating The, She4am0
UPC - 825225875154
View all Bosch SHE5AL06UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
OPERATING THE: SHE4AM0 SHE4AM1 WARNING You could be seriously scalded if you allow hot water to splash out of the dishwasher. OPEN THE DOOR CAREFULLY during any wash or rinse cycle. Do not fully open the door until water noises have stopped. To Start Unit: • Door must be closed. Press the "ON/OFF" button to turn the unit on. • One of the Wash Cycle Indicator Lights will be flashing to show you are in the Wash Cycle selection mode. • Press the "" button to select the desired wash cycle. • If desired select the "HALF LOAD" or DELAY START" features at this point. o If you would like to delay the start time of the dishwasher press the "DELAY" button until the desired delay time (3/6/9 hrs.) shows on the Indicator Lights. o In addition to your Wash Cycle selection, for small loads of lightly soiled dishes press the "HALF LOAD" button. This will save energy and water (SHE4AM1# only). • Press the "START" button to begin the cycle (Wash Cycle Indicator Light will stop flashing and the "Active" Indicator Light will illuminate) Note: Rinse Agent Indicator Light will be illuminated if the unit needs Rinse Agent. Child Lock • After pressing the "START" button you can activate the Child Lock feature. • Press and hold down the "" button. • The "Clean" Indicator Light and at least one addition Indicator Light will be flashing to show you are in the Options Setup Mode. • Press the ">" button to select the option you would like to adjust o If the "CLEAN" and "RINSE AGENT" Indicator Lights are flashing you are ready to set the amount of Rinse Agent the unit will dispense. o If the "CLEAN" and "SANITIZED" Indicator Lights are flashing you are ready to turn your Extra Dry Heat option on/off. To Set the Amount of Rinse Agent Dispensed NOTE: If your glasses have spots you need more Rinse Agent. If your glasses have streaks you need less Rinse Agent. • With the "CLEAN" and "RINSE AGENT" Indicator Lights flashing. • Press the "