Bosch SPV68U53UC Instructions for Use - Page 18
Auto Power Off, InfoLight® model dependent
View all Bosch SPV68U53UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Auto Power Off To save energy, the dishwasher is turned off 1 minute after the wash cycle ends. Auto Power Off can be adjusted from P:00 to P:02. To change the setting: 1 Press the [On/Off] button. 2 Hold down the "A" button (see page 14) and press [Start] until the display indicates "@:0x" (x can be any number). 3 Release both buttons. 4 Press the "A" button until the display indicates "P:0x". 5 Press the "C" button until the display corresponds with your requirements. P:00 = dishwasher does not turn off automatically P:01 = dishwasher turns off automatically after 1 minute P:02 = dishwasher turns off automatically after 120 minutes (2 hours) 6 Press [Start] to save the setting. InfoLight® (model dependent) An LED illuminates the floor to indicate the unit is running. If the appliance is installed at eye-level, the LED is not visible. To change the setting: 1 Press the [On/Off] button. 2 Hold down the "A" button (see page 14) and press [Start] until the display indicates "@:00". 3 Release both buttons. 4 Press the "A" button until the display shows "1:01". 5 Press the "C" button to switch between "1:01" = ON and "1:00" = OFF and press [Start] to save. Aquastop® Leak Protection Our AquaStop® system contains leaks through a precisely engineered tub and sensor system that works with our solid molded base. If a leak has occurred, it shuts down operation and automatically pumps out water to avoid contact with the floor. It works 24/7 and can turn itself on. 16