Bosch WAW285H2UC Instructions for Use - Page 37
Appliance settings
View all Bosch WAW285H2UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Appliance settings Child lock You can secure the appliance against inadvertent changing of the set functions. To do this, activate the Child lock after cycle start. To Activate/Deactivate, press Finish in M and N for approximately 3 seconds. In the display field, you will see the D symbol light indicating the Child lock is active. NOTICE: The Child lock will remain activated after the end of the cycle and the door will remain locked. Even switching the appliance off and on will keep the door locked and will not deactivate the Child lock. You must deactivate Child lock and, if necessary, activate it again. Activating setting mode In order to change the default appliance settings described below, you will first need to enter or activate setting mode. # + To enter or activate the setting mode: 1. Switch on the appliance. The indicator lamp of the program on position 1 (() lights up. 2. Press and hold Temperature button and, at the same time, turn the program selector to position 2 (0). 3. Release Temperature button. The setting mode is now activated. Changing the audible signal volume You can adjust the volume of audible notification signals (that indicate that a program has ended, for example) and audible button signals by turning the program selector to the following positions: ▯ 2 (0): Audible notification signal volume selectable values: ‹ = off, , = quiet, ƒ = medium, „ = loud, ... = very loud ▯ 3 (8): Audible button signal volume selectable values: ‹ = off, , = quiet, ƒ = medium, „ = loud, ... = very loud 1. Turn the program selector to the required position. 2. Use the Finish in N or M button to set the volume you require (‹ = off; ... = very loud). Switching the automatic switch-off function on/off If the appliance is not used for an extended period, it may automatically switch itself off until a program starts or when a program has ended in order to save energy. It can be switched back on again at any time by pressing the power button #. You can switch the appliance's automatic switch-off function on or off as follows: 1. Turn the program selector to position 4 (@). 2. Use the Finish in N or M button to switch the appliance's automatic switch-off function on (‹Ÿ) or off (‹""). NOTICE: The automatic switch-off function cannot be activated if Wi-Fi is activated. Switching the Drum Clean reminder on/off A reminder to clean the drum is indicated by a light adjacent to the Drum Clean program. In order to switch the drum clean reminder on (or off, if desired): 1. Turn the program selector to position 5 (H). 2. Use the Finish in N or M button to switch the drum clean reminder on (‹Ÿ) or off (‹""). Exiting setting mode Once you have applied all the settings, press the power button # to switch off the appliance. The settings you have selected will be saved and will take effect the next time the appliance is switched on. 37
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48