Bosch WFVC6450UC User Manual - Page 26

During, Washing, After - door lock

Page 26 highlights

During Washing The washer drum system may experience a slight shudder or shake as the drum accelerates to higher spin speeds due to normal laundry imbalance. ReĆselecting a cycle q Turn the cycle selector to Off. q Turn the cycle selector to a newly selected cycle. The Start/Pause indicator light flashes. q If required, change the settings. (see Page NO TAG). q Press the Start/Pause button. The cycle starts. Add a garment / Interrupting the cycle You can put laundry in the drum after washing begins, take laundry out of the drum early or interrupt the cycle at any time. i It is not recommended to add laundry after the washing phase is complete. i You can add or reduce laundry as long as the Start/Pause indicator light flashes and it is safe to do so. q Press the Start/Pause button. The following displays are indicated in succession: Pause", Door can be opened". q Open the door. q Add/remove the laundry. q Close the door. q Press the Start/Pause button. The cycle continues. The indicator light is lit. i When the Start/Pause indicator light is illuminated, the cycle can be interrupted, however in some cases the door will not be unlocked for safety reasons (high water level, water temperature or drum speed). i If the speed is too high, the Start/Pause indicator light is illuminated. Laundry can be added in Pause" mode when the drum is at a standstill. Canceling the active cycle If you would like to terminate a cycle and remove the laundry: q Press the Start/Pause button q If Child Lock is active, it is necessary to press and hold down the Start/Pause button for five seconds q If the load is too wet, turn the cycle selector to Drain/Spin and run the cycle using a spin speed appropriate for the laundry type (see pg. 22 for suggested spin speeds). If a cycle is interrupted at a high temperature, the door will remain locked until the temperature in the drum has cooled down. If the cycle is terminated by switching the appliance to Off , the door will may remain locked until the appliance is switched back on. Turn the cycle selector to any other cycle. The door will unlock after approximately 5 seconds. After Washing The Start/Pause indicator light turns off. Display field: Remove laundry". q Open the door. q Turn the cycle selector to Off. q Close the faucets. q Remove the laundry. NOTICE To avoid the risk of rust, check for foreign objects (e.g. coins, paper clips) between the drum and rubber door seal. i After washing, leave the washer loading door open for 24 hours to allow the inside of the washing machine to dry. 26

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104

26
During
Washing
The washer drum system may
experience
a
slight
shudder or
shake
as
the
drum accelerates
to
higher spin speeds
due
to
normal laundry
imbalance.
ReĆselecting
a
cycle
q
Turn the
cycle
selector to
Off
.
q
Turn
the
cycle
selector to a
newly
selected cycle.
The
Start/Pause
indicator light
flashes.
q
If required, change the
settings.
(see
Page
NO±TAG).
q
Press the
Start/Pause
button.
The
cycle
starts.
Add
a garment±/
Interrupting the
cycle
You can
put
laundry in
the
drum
after
washing
begins,
take
laundry out of
the
drum early or
interrupt
the
cycle
at any
time.
i
It is not
recommended to
add
laundry after
the
washing phase
is
complete.
i
You can
add or
reduce
laundry as
long
as the
Start/Pause
indicator
light
flashes and it
is
safe
to
do so.
q
Press the
Start/Pause
button.
The
following
displays
are
indicated in
succession:
²Pause",
²Door
can
be
opened".
q
Open
the
door.
q
Add/remove
the
laundry.
q
Close
the
door.
q
Press the
Start/Pause
button.
The
cycle
continues.
The
indicator
light
is
lit.
i
When
the
Start/Pause
indicator
light is
illuminated,
the
cycle
can
be
interrupted,
however
in
some
cases
the
door
will not
be
unlocked
for
safety reasons
(high
water
level,
water
temperature
or
drum
speed).
i
If
the
speed
is
too
high,
the
Start/Pause
indicator
light
is
illuminated.
Laundry can
be
added
in ²Pause" mode
when
the
drum is
at a
standstill.
Canceling
the
active
cycle
If
you would
like
to
terminate
a
cycle
and remove
the
laundry:
q
Press
the
Start/Pause
button
q
If
Child
Lock
is
active,
it
is
necessary to
press
and
hold
down
the
Start/Pause
button
for
five
seconds
q
If
the
load
is
too
wet,
turn
the
cycle
selector
to
Drain/Spin
and run
the
cycle
using
a
spin
speed
appropriate
for
the
laundry type
(see pg.
22
for
suggested
spin
speeds).
If
a
cycle
is
interrupted
at
a
high
temperature,
the
door
will remain
locked
until the
temperature
in
the
drum has
cooled
down.
If
the
cycle
is
terminated
by
switching
the
appliance
to
²Off
²,
the
door
will may remain
locked
until the
appliance
is
switched
back
on.
Turn
the
cycle
selector
to
any other
cycle.
The
door
will
unlock
after
approximately 5
seconds.
After
Washing
The
Start/Pause
indicator light turns
off.
Display field:
²Remove
laundry".
q
Open
the
door.
q
Turn
the
cycle
selector to
Off
.
q
Close
the
faucets.
q
Remove
the
laundry.
NOTICE
To
avoid
the
risk
of
rust, check
for
foreign
objects
(e.g.
coins, paper
clips) between
the
drum and
rubber
door
seal.
i
After
washing,
leave
the
washer
loading
door
open
for 24
hours
to
allow
the
inside
of
the
washing
machine
to
dry.