Bosch WFVC6450UC User Manual - Page 8

Notice, Warning - weight

Get Bosch WFVC6450UC - Vision 500 EcoSmart Washing Machi PDF manuals and user guides
UPC - 825225880745
View all Bosch WFVC6450UC manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

The accessory parts bag contains: 1. Covers to be placed over the holes for the transport bolts (after removing the transport bolts during washer installation). 2. Wrench for leveling. 3. Clamp for drain hose. On the back of the washer: 1. power cord with plug 2. hot and cold water connections 3. 4 shipping bolts Useful tools The following tools are helpful: 1. Flat head screwdriver. 2. Socket wrench13 mm 3. Closed wrench 13 mm NOTICE DO NOT push against the washer door glass. Risk of breakage! Dimensions a = 27.0 in. (68.7 cm) b = 29.7 in. (75.4 cm) c = 36.8 in. (93.5 cm) (minimum)* 37.8 in. (96.2 cm) (maximum)* d = 20.7 in. (52.5 cm) e = 49.8 in. (126.3 cm) * height of appliance depends upon extension of height-adjustable feet. Minimum height is with feet turned all the way in, against the bottom of the washer. Maximum height is with feet extended as far as permitted (must leave thread of screw engaged enough for foot to be stable (1/4 inch / 6.4 mm) when extended). Door opening angle 160° Approx. weight = 220 lbs (100 kg) Installation area d WARNING Never ground the washer to plastic plumbing lines, gas lines or hot water pipes. This appliance must be installed on a solid floor and well leveled due to the higher spin speeds available. If installing the machine on a wood floor over a basement or on a second floor, the floor may need to be reinforced. Sound, vibration, and risk of the washer walking" will be influenced by the structure and stability of the floor surface where the appliance is installed. q Soft floor surfaces, such as carpets or surfaces with foam backing, are not suitable. If possible, place the washing machine in a corner of the room. If the washing machine is to be installed on a weak wood floor, consider the following: q Screw a section of water-resistant plywood (at least 3/4" thick) to the floor. The plywood should be sized to fit the footprint of the washer, approximately 27" wide x 29.7" deep, or 54" wide x 29.7" deep to extend underneath both the washer and the dryer for best results and even height of the appliances. q Secure the feet of the washing machine with holding brackets. Order the holding brackets (set) from Bosch Customer Service (WMZ 2200). 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
8
The accessory
parts
bag contains:
1.
Covers to
be
placed over the
holes
for
the
transport
bolts
(after
removing
the
transport bolts
during
washer
installation).
2.
Wrench
for
leveling.
3.
Clamp for
drain
hose.
On the
back
of
the
washer:
1.
power cord with
plug
2.
hot and cold water connections
3.
4
shipping
bolts
Useful
tools
The following
tools are
helpful:
1.
Flat head screwdriver.
2.
Socket
wrench13
mm
3.
Closed wrench
13
mm
NOTICE
DO
NOT
push
against
the
washer
door glass.
Risk
of
breakage!
Dimensions
a =
27.0
in.
(68.7
cm)
b =
29.7
in.
(75.4
cm)
c
=
36.8
in.
(93.5
cm) (minimum)*
37.8
in.
(96.2
cm) (maximum)*
d =
20.7
in.
(52.5
cm)
e
=
49.8
in.
(126.3
cm)
* height of
appliance
depends
upon
extension
of
height-adjustable
feet.
Minimum height
is
with
feet
turned
all
the
way in,
against
the
bottom of
the
washer.
Maximum height
is
with
feet
extended
as
far
as
permitted
(must
leave
thread
of
screw
engaged
enough
for
foot
to
be
stable
(1/4
inch
/
6.4
mm) when
extended).
Door opening
angle
160°
Approx.
weight
=
220
lbs
(100
kg)
Installation
area
d
WARNING
Never ground
the
washer to
plastic
plumbing
lines,
gas
lines
or hot
water
pipes.
This appliance
must be
installed
on
a
solid floor
and well leveled
due
to
the
higher
spin
speeds
available. If
installing
the
machine
on
a
wood
floor
over
a
basement or on
a
second floor,
the
floor may
need
to
be
reinforced.
Sound, vibration, and
risk
of
the
washer
²walking"
will
be
influenced by
the
structure
and
stability
of
the
floor
surface
where
the
appliance
is
installed.
q
Soft
floor
surfaces, such
as
carpets
or
surfaces
with
foam
backing,
are
not
suitable. If
possible,
place
the
washing
machine
in
a
corner of the
room.
If
the
washing
machine is
to
be
installed
on
a
weak
wood
floor,
consider the
following:
q
Screw
a
section
of
water-resistant
plywood
(at
least
3/4" thick)
to
the
floor.
The
plywood
should
be
sized
to
fit
the
footprint of the
washer,
approximately 27" wide
x
29.7" deep,
or
54"
wide
x
29.7"
deep
to
extend
underneath
both
the
washer
and
the
dryer for best
results
and
even
height of the
appliances.
q
Secure
the
feet
of
the
washing
machine
with
holding
brackets.
Order
the
holding
brackets
(set)
from Bosch
Customer Service
(WMZ
2200).