Bosch WTMC533SUS Operating, Care, Installation - Page 16
Operating, Instructions
View all Bosch WTMC533SUS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
OPERATING INSTRUCTIONS Before using d WARNING Before using your dryer, read and follow all installation and operating instructions. Panel D E G A B C F A Start/Pause button Starts, interrupts and ends the drying process. Start/Pause LED Status Lit Red: Program is running and "Pause" can be activated. Blinking: Settings can be changed, the drying cycle can be started, or program is in Pause" mode. Not Lit: Program is finished or there is no program selected. B Option buttons Add functions to the program selected. The option button LED is lit when the option is selected. Press the option button again to turn the option off (LED turns off). Delicates low temp: Press for temperature-sensitive textiles (e.g. acrylic fibers). The temperature of the drying process is reduced, the drying time is extended correspondingly. ECO e: Press for additional energy savings (use only for cotton and permanent press auto programs). Press the option button prior to starting an automatic program. C Signal (500 Series) Press the two option buttons at the same time to enable an acoustic signal that indicates the end of the program (see page 18). The 800 Series signal is set on the LCD menu (see page 20). D Display 500 Plus Series Indicates the estimated remaining time of programs. 800 Series Indicates the settings of the additional options and the estimated remaining time of programs. (See page 20) Additional Options Menu selects one of the additional options Select changes the settings of the selected option E Lint Filter LED Blinks as a reminder to clean the lint filter before and after use. Lit (steady) when the door is opened during a program, or in the event airflow is reduced enough to create an E:01 error (see troubleshooting guide, page 25). F Indicator Lights LED'S light up in sequence to show the current moisture state of the drying process. Wrinkle block - at the end of the drying program an acoustic signal sounds and the Wrinkle block LED lights up. The drum rotates at specific intervals for one hour to prevent the laundry from creasing (see page 18 ). G Program Selector Switches the machine on and off and selects the program (see page 18). Can be turned in both directions. To switch off the dryer, rotate the program selector to Off". 16