Bose 901 Series VI Loud Owner's guide - Page 18

English Product Information Technical information Bose® 901® Series VI Direct/Reflecting® Loudspeakers Transducer complement Nine (9) 41/ " (11.4 cm) full-range Helical 2 Voice Coil drivers in each cabinet Energy dispersion 89% by reflection 11% by direct radiation Enclosure 14-element Acoustic Matrix™ enclosure with three reactive air columns Nominal impedance 8Ω (ohms) Amplifier compatibility Compatible with amplifiers/receivers rated from 10 - 450 watts RMS. Rated 250 watts IEC Recommended fusing Series connected 3A quick-acting fuse Buss AGC-3, Littelfuse 312-003, or equivalent Cabinet Oil-rubbed hardwood veneer with walnut finish Black vinyl veneer Dimensions 21"W x 125/ "H x 13"D 8 (53.3 x 32.0 x 33.0 cm) Weight 35 lb. (16 kg) per enclosure Wire recommendations Gauge Length 18 (0.75 mm2) 16 (1.5 mm2) 14 (2.0 mm2) 30 ft (9 m) maximum 45 ft (14 m) maximum 70 ft (21 m) maximum 901 Series VI active equalizer Input Impedance 47 k ohms (47 kΩ) Output Impedance 1 k ohm Usable dynamic range 106 dB @ 35 Hz Noise (A-weighted) Greater than 90 dB below 1 volt Distortion Less than 0.09% THD at 1 kHz, 1 V input Compensation controls Mid-Bass, ±6 dB @ 225 Hz Mid-Treble, ±6 dB @ 3 kHz Bass Switch - 6 dB @ 35 Hz Power Requirements 120V ~ 50/60Hz, 3.5W 220-240V ~ 50/60Hz 3.5W 100V ~ 50/60Hz 3.5W Cabinet Black anodized aluminum Dimensions 13"W x 23/ "H x 5"D 4 (33.0 x 7.0 x 12.7 cm) Weight 3.4 lb (1.5 kg) Accessories To find out about PS-6 floor pedestals, contact your Bose dealer. Or call Bose directly (see inside back cover for phone numbers). 18