Bose Acoustimass 10 Series IV Owner's guide - Page 8
English, Français, Español - connections
View all Bose Acoustimass 10 Series IV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Français Español English SETTING UP 2. Use the supplied 50-ft (15.2 m) speaker cables for the speakers at the rear of your room (Figure 5). Insert them into the jacks on the module as follows: • RR goes into the jack labeled Right Rear. • LR goes into the jack labeled Left Rear. 3. At the other end of each cable, insert the red-collared (+) wire into the red (+) terminal on one speaker. Insert the other wire into the other terminal (Figure 5). Notice a label on each red-collared wire that matches it to the proper speaker: Figure 5 Completing connections of the small speakers to your Acoustimass® module • L for the speaker at the left front • R for the speaker at the right front • C for the speaker at the center front Acoustimass® 10 system module • LR for the speaker at the left rear • RR for the speaker at the right rear Right front speaker Center front speaker Left front speaker RR label Red terminal Red-collared wire labeled LR 8