Bose Acoustimass 10 Series V Owner's guide - Page 7
Making the connections - acoustimass 10 series 3
View all Bose Acoustimass 10 Series V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Setting Up Making the connections Only the Acoustimass® module connects to your receiver. The speakers all connect directly to the Acoustimass module. WARNING: Do not connect the speakers to a receiver. This can result in damage to your system and possible electric shock. Connecting speakers to the Acoustimass module Insert the plug on each speaker cable into the connector on the module. Match the label on the plug to the proper connector. 1. Use the supplied 20-ft (6.1 m) speaker cables for the three front speakers. • Insert the R plug into the connector labeled Right Front. • Insert the C plug into the connector labeled Center Front. • Insert the L plug into the connector labeled Left Front. 2. Use the supplied 50-ft (15.2 m) speaker cables for the speakers at the rear of your room. • Insert the RR plug into the connector labeled Right Rear. • Insert the LR plug into the connector labeled Left Rear. 3. Insert the other end of each cable into the connector on each speaker, with the label facing down. Note: Find the label on each speaker cable that matches it to the proper speaker: Speaker cable label L for the speaker at the left front R for the speaker at the right front C for the speaker at the center front LR for the speaker at the left rear RR for the speaker at the right rear Acoustimass 6 series V system Acoustimass 10 series V system English - 7