Bose Acoustimass 6 Series III Owner's guide - Page 14

Using your system Be sure to get the digital audio signal To be sure that the digital audio signal from your DVD player reaches your surround receiver, connect the digital audio output from your DVD player to the digital audio input on your receiver (Figure 7). Before you play a DVD disc, be sure to select the digital ouput in the setup menu of your DVD Player. For additional setup and operating information, please refer to the owner's guide that came with your surround receiver. Figure 7 Digital signal connections on a surround receiver Note: Use the OPTICAL or COAXIAL OR digital input connections, but not both. DIGITAL PLAY IN IN (OPTICAL) PLAY IN (COAXIAL) DIGITAL PLAY IN IN (OPTICAL) PLAY IN (COAXIAL) FRONT SPEAKERS R L SURROUND SPEAKERS R REAR L CENTER Setting your analog surround sound receiver For analog surround sound (not digital) applications, we recommend that you set the surround-sound center mode of your receiver to WIDE. Instructions for this process vary, depending on the brand and model of your surround receiver. Follow your receiver owner's guide for testing and adjusting the balance of each speaker. 14 264887_00 _V.pdf • August 13, 2002