Bose Acoustimass 6 Series III Owner's guide - Page 9
CENTER, RIGHT, Center Front, Right Front, Left Front, LEFT REAR, RIGHT REAR, Right Rear, Left Rear - speakers
View all Bose Acoustimass 6 Series III manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Setting Up 1. Connect the wire pair marked CENTER to the center cube speaker (Figure 5). Press the terminal tab on the back of the cube speaker. Insert the marked (+) wire into the red terminal and the plain (-) wire into the black terminal. Release the tab to secure the wires. 2. Connect the wire pair marked RIGHT to the right front cube speaker (to the right of the TV as you face it). 3. Connect the wire pair marked LEFT to the left front cube speaker. 4. Plug the other end of each cable into the Center Front, Right Front, and Left Front blue RCA jacks, respectively, on the Acoustimass® module. Connecting rear cube speakers to the Acoustimass module Each rear cube speaker is connected to the Acoustimass module with a 50-foot (15 m) speaker cable (Figure 5). Be sure to match the correct cable with the corresponding speaker location. Rear speaker cables have orange RCA connectors at one end with LR (left rear) and RR (right rear) molded into the connectors. The other ends of the cables have two wires. The red collars on the + wires are labeled LEFT REAR and RIGHT REAR. 1. Connect the wire pair marked RIGHT REAR to the right rear cube speaker (on your right as you face the TV). See Figure 5. Press the terminal tab on the back of the cube speaker. Insert the marked (+) wire into the red terminal and the plain (-) wire into the black terminal. Release the tab to secure the wires. 2. Connect the wire pair marked LEFT REAR to the left rear cube speaker. 3. Plug the other end of each cable into the Right Rear and Left Rear orange RCA jacks, respectively, on the Acoustimass module. 9 264887_00 _V.pdf • August 13, 2002