Bose Acoustimass 6 Owner's guide - Page 11
Connect the module to the surround cube speakers, Connect the module to the receiver - speaker wire
View all Bose Acoustimass 6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Setting Up At the Acoustimass® module, check to be sure the connectors are firmly inserted into the proper OUTPUT TO CUBE SPEAKER jacks. • The black L connector goes into the L jack. • The gray C connector goes into the C jack. • The black R connector goes into the R jack. Connect the module to the surround cube speakers Use the 50 foot (15 m) cable with gray connectors to join the Acoustimass module to the surround speakers. • The gray connector marked LS goes into the gray terminal on the left surround speaker (to your left as you face the TV). • The gray connector marked RS goes into the gray terminal on the right surround speaker. At the Acoustimass module, make sure the gray connectors are firmly inserted into the LS and RS OUTPUT TO CUBE SPEAKER jacks. Connect the module to the receiver Use the 20 foot (6 m) cable with five wire pairs to connect the Acoustimass module to your surround sound receiver. 1. Connect all wires to the receiver in phase (+ to + and - to -). a. Connect each wire marked with a red collar (+) to the appropriate red (+) output. b. Connect each plain wire (-) to the appropriate black (-) output. 2. Match the label on the red collar of each wire pair to the SPEAKER OUTPUT label on the receiver: a. LEFT wires go to the LEFT FRONT SPEAKER OUTPUT connections. b. CENTER wires go to the CENTER SPEAKER OUTPUT connections. c. RIGHT wires go to the RIGHT FRONT SPEAKER OUTPUT connections. d. LEFT SURROUND wires go to the LEFT SURROUND (rear) SPEAKER OUTPUT connections. e. RIGHT SURROUND wires go to the RIGHT SURROUND (rear) SPEAKER OUTPUT connections. 3. At the Acoustimass module, check to make sure all connectors are firmly inserted into the proper INPUT FROM RECEIVER OR AMPLIFIER jacks. Black connectors go into L and R jacks. Gray connectors go into C, LS, and RS jacks. CAUTION: Do not connect the Acoustimass module directly to your television unless the television provides surround decoding circuitry and amplified outputs for all channels. AM189815_04_V.pdf December 20, 2001 11