Bose CineMate 520 Home Theater Owners Guide - Page 30
Care and Maintenance
View all Bose CineMate 520 Home Theater manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Care and Maintenance Problem Poor or distorted sound Intermittent sound What to do • Remove all protective films from the system. • Secure all cable connections on the speakers, TV, and connected sources. • If you see the error message Cannot find Acoustimass: -- Plug in the Acoustimass® module. -- Pair the Acoustimass module with the console (see "If your console cannot find the Acoustimass® module"). • If using the analog or connector, decrease the volume on your source. • Factory reset the system (see page 31) and run the ADAPTiQ® audio calibration (see page 19). • Secure all cable connections on the speakers, TV, and connected sources. • Move system away from potential interference, such as a wireless router, cordless phone, television, microwave, etc. If your console cannot find the Acoustimass® module The Acoustimass module and console are paired at the factory. However, if you see the error message Cannot find Acoustimass on the display, perform this pairing procedure: 1. Unplug the Acoustimass module. 2. Press on the remote control. 3. Press until 15 PAIR ACOUSTIMASS appears on the display. 4. Press . Plug in Acoustimass appears on the display. 5. Plug the AC power cord into an AC (mains) outlet. After the Acoustimass module connects to the console, Pairing complete appears on the display. 30 - English