Bose Lifestyle 12 Series II Owner's guide - Page 31
Adding speakers
View all Bose Lifestyle 12 Series II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Maintaining Your Lifestyle® 12 System Adding speakers Your Lifestyle® 12 system provides high quality audio for a single listening area. However, your music center also provides connections (SPEAKERS A or SPEAKERS B) for adding a pair of powered speakers in a second room. In the second room, you can listen to the sound source that is playing in the main room. You can purchase an additional remote control to keep in the second room. Keep the following considerations in mind if you choose to connect secondary speakers. Using speakers connected to the B outputs: • You must use a second remote control, set to B (see instructions below), to turn on the B speakers. • Adjusting volume with this second remote adjusts volume for only the B speakers. • Using the mute key on the second remote mutes or unmutes the second room speakers. Using speakers connected to the A outputs: • The music center controls operate speakers connected to FIXED and A outputs. • Adjusting volume from the music center control panel or with the remote control that came with the system adjusts volume for speakers connected to FIXED and A outputs. • Using the mute key on the main remote mutes or unmutes speakers connected to FIXED and A outputs. Setting a second remote for additional speakers You need a second remote control, set to B, to operate speakers connected to the SPEAKERS B outputs. When you purchase a second remote control, it is shipped set to A, to control your main speakers. It will also control secondary speakers connected to SPEAKERS A. To set your second remote to control speakers connected to B, follow these steps: 1. Open the remote control battery cover. 2. Locate miniature switch 5. Slide the switch down (Figure 22). 3. Locate miniature switch 6. Slide the switch up (Figure 22). 4. Make sure that the house code switches match those on your first remote (see page 28). 5. Replace the battery cover on the remote control. Note: Switches 7 and 8 are not for current system use. Figure 22 Speaker code switch settings ON K40 l 2345678 ON K40 l 2345678 Set to SPEAKERS A Set to SPEAKERS B AM196573_05_V.pdf October 29, 2001 29