Bose S1 Pro English Owners Guide - Page 8
Connecting Power, Connecting Sources
View all Bose S1 Pro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
System Setup Connecting Power 1. Make sure the power switch is in Standby ( ). 2. Plug the power cord into the connector on the S1 Pro. 3. Plug the other end of the power cord into a live electrical outlet. 4. Power on the system by turning the power switch to On ( ). 1 SIGNAL 1 SIGNAL 2 SIGNAL 2 SIGNAL 3SIGNAL 3SIGNAL 1 2 3 Connecting Sources Before connecting a sound source, adjust the appropriate channel Volume control fully counterclockwise. Channel 1 & 2 Controls Channel 1 and 2 are for use with dynamic microphones, guitars, keyboards or other instruments. 1. Connect your sound source to the Channel input of either Channel 1 or 2. 2. Apply a ToneMatch preset by adjusting the ToneMatch switch for the appropriate channel to for microphones or for other instruments. Note: ToneMatch® presets automatically optimize the sound of your microphone or instrument. 3. Adjust the Volume control clockwise-while speaking into the microphone or playing your instrument- until the volume has reached the desired level. 4. Adjust the Treble, Bass and Reverb controls-while speaking into the microphone or playing your instrument-until the desired effect is achieved. Channel 3 Controls Channel 3 is for use with Bluetooth®-capable devices and line-level audio inputs. Bluetooth Pairing 1. Turn on the Bluetooth feature on your mobile device. Note: The Bluetooth feature is usually found in the Settings menu. 2. Press and hold the Bluetooth Pair button for two seconds. Note: When ready to pair, will flash white. 3. Select your Bose® S1 Pro system from the device list. Note: When the device pairs successfully, will turn solid white. Note: If your paired phone receives a call, any music playing will be paused and the ring will come through the phone; no calls or notifications will come through the S1 Pro. Aux Input Connect a line-level sound source to the Aux input via a 3.5 mm (⅛") cable. Note: Anything connected via the Aux input will automatically override any paired Bluetooth device. 8 • English S1 Pro System • Owner's Guide