Bose SoundTouch Wireless Link Adapter Multilingual Owners Guide - Page 30

ALTERNATE SETUP Set up your SoundTouch® Wireless Link ­using a computer You can set up your SoundTouch® Wireless Link using a computer rather than a ­smartphone or tablet. Before you begin • Position your SoundTouch® Wireless Link next to your computer. • Make sure your computer is on your Wi-Fi® network. • Obtain a USB A to USB Micro B cable (not provided). Notes: • A USB A to USB Micro B cable is commonly used for charging mobile devices. You can also purchase this part at your local electronics store. If you don't have this ­cable, contact Bose® customer service to receive this part. Refer to the contact sheet in the carton • The USB connector on the back of your SoundTouch® Wireless Link is for ­computer setup only. The USB connector is not designed to charge ­smartphones, tablets, similar devices, or the SoundTouch® Wireless Link itself. Computer Setup During setup, the app prompts you to temporarily connect the USB cable from the ­computer to your SoundTouch® Wireless Link. Do not connect the USB cable until the app instructs you to do so. 1. Plug the power cord into an AC (mains) power outlet. 2. On your computer, open a browser and go to: global.Bose.com/Support/STWL Tip: Use the computer where your music library is stored. 3. Download and run the SoundTouch® app. The app guides you through setup. 4. After setup is complete, disconnect the USB cable from your computer and from your SoundTouch® Wireless Link. Move your SoundTouch® Wireless Link to its ­permanent location. 30 - ENGLISH