Bose T4S ToneMatch Mixer English Owners Guide - Page 12
Connecting the T4S via Digital Connection - t4s tonematch digital mixer
View all Bose T4S ToneMatch Mixer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
System Setup Connecting the T4S via Digital Connection 1. Make sure the L1 Model 1S/II and T4S are powered off and the T4S Master volume control is set to minimum. 2. Plug one end of the ToneMatch® cable into the Power port/Digital Main Output R on the T4S. Plug the other end of the ToneMatch cable into the ToneMatch port on the power stand. Note: To connect the T4S to two L1 Model 1S/II power stands, connect a second power stand to the Digital Main Output L port on the T4S using a ToneMatch cable. 3. Turn on the mixer and then turn on the L1 Model 1S/II power stand. 4. Connect your instruments and adjust levels. Refer to "Optimizing Input Gain and Output Volume" on page 17. Figure 9. Two L1 model II systems connected to a T4S via digital connection USB AUDIO MONO M () Note: The T8S cannot be connected digitally and cannot be powered by the L1 Model 1S/II. 12 - English