Bose Ultimate Circled In Soundbar With Owners Guide - Page 5

REGULATORY AND LEGAL INFORMATION Low-power Radio-frequency Devices Technical Regulations: Without permission granted by the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original characteristic as well as performance to an approved low power radio-frequency devices. The low power radio-frequency devices shall not influence aircraft security and interfere legal communications; If found, the user shall cease operating immediately until no interference is achieved. The said legal communications means radio communications is operated in compliance with the Telecommunications Management Act. The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM radio wave radiated devices. Product Power State Table The product, in accordance with the Ecodesign Requirements for Energy Related Products Directive 2009/125/EC and the Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020, is in compliance with the following norm(s) or document(s): Regulation (EC) No. 1275/2008, as amended by Regulation (EU) No. 801/2013. Required Power State Information Standby Power Modes Networked Standby Power consumption in specified power mode, at 230V/50Hz input Time after which equipment is automatically switched into mode Power consumption in networked standby if all wired network ports are connected and all wireless network ports are activated, at 230V/50Hz input < 0.5 W < 2.5 hours N/A all network types < 2.0 W < 20 minutes < 2.0 W Wireless network port activation/deactivation procedures. Deactivating all networks will enable standby mode. Wi-Fi®: Tap the Microphone button atop the soundbar until the microphone is turned on and the indicator light is no longer a solid red. Activate Wi-Fi using the Bose app. Deactivate Wi-Fi by pressing and holding the Mute and Bluetooth buttons on the remote simultaneously. Bluetooth®: Tap the Microphone button atop the ­soundbar until the microphone is turned on and the indicator light is no longer a solid red. Activate by pairing with a Bluetooth source by pressing the Bluetooth ­button on the remote then selecting the soundbar in your mobile device Bluetooth list or by using the Bose app. Deactivate by clearing the pairing list by ­pressing and holding the Bluetooth button on the remote for 10 seconds. Wired network port activation/deactivation procedures. Deactivating all networks will enable standby mode. Ethernet: Tap the Microphone button atop the soundbar until the microphone is turned on and the indicator light is no longer a solid red. Activate by inserting the Ethernet cable. Deactivate by removing the Ethernet cable. Please dispose of used batteries properly, following local regulations. Do not incinerate. |5 E N G