Bose Wave Radio II Owner's guide - Page 16
Using your Wave, radio, with other audio equipment, Connecting your Wave, to a Lifestyle, system
View all Bose Wave Radio II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
English Español Connecting Other Equipment Using your Wave® radio II with other audio equipment When using a TV, VCR, computer, video game or cassette tape player, you can enhance your listening experience by playing the audio device through your Wave® radio II. Connecting an audio device to your Wave® radio II, requires one of the following cables: • Male-to-male 3.5 mm (1/8") stereo cable • Dual RCA male to 3.5 mm (1/8") male stereo cable To obtain the correct cable, contact Bose® Customer Service or visit a local electronics store. See the phone numbers listed inside the back cover of this guide. To connect an audio device, such as your TV, to your Wave® radio II: 1. Connect one end of the stereo cable to the output of the audio device. 2. Connect the other end of the cable to the AUX IN connector on the rear panel of your Wave® radio II. On Off 3. Turn on your Wave® radio II and the audio device. AUX 4. Press AUX. 5. Press and hold Volume or to adjust the listening level. Note: If the volume level of your Wave® radio II cannot be adjusted high enough, try to increase the volume level of the connected audio device. Français TV Dual RCA male to 3.5mm (1/8") male stereo cable AUX IN connector Connecting your Wave® radio II to a Lifestyle® system You can use your Wave® radio II as a multi-room expansion speaker system for a Bose® linkenabled Lifestyle® home entertainment system. Your Wave® radio II was set up at the factory for room B. To change this setting, see "Setting the room code" on page 21. Contact Bose® Customer Service to obtain the required cables and instructions. See the phone numbers listed inside the back cover of this guide. 16