Bose Wave SoundTouch Owner's Guide - Page 18

Setting and Using the Alarms Alarm buttons and indicators The Wave® SoundTouch™ music system has two independent alarms, Alarm 1 and Alarm 2. Each alarm can be set for: • Time • Wake-up source: buzzer, radio, or CD • Volume Using the Alarm buttons Using the Alarm buttons on the bottom of the remote you can setup and operate each alarm: Press to turn Alarm 1 on or off. Press to turn Alarm 2 on or off. 1. Press to activate the Alarm Setup mode and view Alarm 1 settings. 2. Press again to view Alarm 2 settings. 3. Press again to exit the Alarm Setup mode. Alarm status indicators The upper right-hand corner of the display shows the alarm status indicators if the alarm is set. Example with Alarm 1 and 2 set: Alarm 1 Alarm 2 Alarm 1 time AM PM AM PM Alarm 2 time Setting the alarms You can choose the settings for each alarm by activating the Alarm Setup mode and displaying the settings for the alarm you want to change. To setup Alarm 1 or 2: 1. Press Alarm Setup to activate the Alarm Setup mode. First, the alarm number and time start flashing (A). After a moment, the current settings for Alarm 1 are displayed (B). A B 2. Using the Time buttons, set the alarm time. 3. Select your wake-up source: • BUZZER is the factory alarm setting. • Press to choose a radio station. • Press to choose a track. Note: You cannot select AUX or SoundTouch™ as the wake-up source. 4. Press Volume up or down to set the volume level of the selected wake-up source. 5. Press to enter the Alarm 2 setup mode. Repeat Steps 2-4 to set up Alarm 2. 6. Press again to exit the Alarm Setup mode. The alarm you set is turned on and the alarm time appears on the display: Alarm number and time 18 - English