Boss Audio BV7348B User Manual - Page 19

BASIC OPERATION - Retrieve a preset station press the 1-6 buttons briefly on the remote control to retrieve a station which had been stored in the memory in advance the chose number is shown on display . Automatic Memory Storing & Program Scanning - the function REG ON prevents the radio from switching to alternative frequency which have a different regional program content . REG OFF : the program identification(PI) of the regional program is ignored during the search for an alternative frequency (AF) or a program identification (PI) . Automatic Preset Setup In Radio Mode, press and keep (for more than 2 ' S) the remote of " APS " button to active automatic station storage. The radio searches within the current frequency band, e.g. FM1, for the stronger signal level until the search cycle has finished . The six strongest stations are then allocated to the corresponding storage locations . Then the station of the first storage location is set . Scan Function In Radio mode, briefly press the "APS" button on the remote control , the radio briefly plays all the preset stations of the frequency band . RDS FUNCTION ADJUSTABLE ITEMS: Select RDS REGIONAL to turn RDS function on or off. PI SET To change between PI MUTE and PI SOUND . PI MUTE / PI SOUND (only for radio operation) If you are in an area where two program identifications (PI) overlap, you can select the option PI SOUND and PI MUTE for playback of the sound. Alternate switching of the program identification should be avoided . PI SOUND : If switching nevertheless occurs the sound of another station is heard for less than one second . PI MUTE : the sound of another station is suppressed . REGION SET To switch the REGION function ON and OFF. TA Traffic Announcement (Priority For Traffic Information) REG FUNCTION at certain times some stations divide up their programs into regional programs with varying content . REG ON : the message "REG ON" will appears in the display for a few seconds . Note : - the display capacity is limited . It is possible that in the double display mode some segments of the display are deleted . In Radio mode, long press the 0/TA button to switch the TA function ON and OFF . When the TA function is activated, the TA symbol appears in the display . During radio operation in one FM frequency band the search for a traffic announcement station is started automatically (TA SEEK) . -17-