Boss Audio BV7348B User Manual - Page 23

BT OPERATION Bluetooth Operation 1. Pairing and Connecting Prior to using the BT device named Boss Audio as a hands-free system for a BT-enabled mobile phone for the first time, you must pair and connect them as follows: CALL IN PROGRESS 00:01:32 * During operation of the device named Boss Audio as a hands-free system for a BT- enabled mobile phone, place the BT-enabled mobile phone no more than 3 meters from the head unit; Answer a call After you hear the ring tone (the incoming Select the BT hands-free icon or press telephone number will display on the PAIR button to turn to BT PHONE mode. TFT LCD), press the " "button briefly on First,switch on the BT function of your the front panel to listen . mobile phone; then search and find a BT device named Boss Audio, then select and enter it and it will pair and connect with the BT device Boss Audio of the car A/V system automatically. Then the frame of the BT logo will light all the time. * When finishing pairing and connecting, the audio of the mobile phone transfers to the car audio system whenever a call is made or received or the mobile phone plays music. Make a call Dial the number on the remote control and then press briefly the " " button . When you dials the wrong number, press " " button to delete it. Redial last number When displaying BT phone interface, press and hold the " " button(approximately 2 seconds) on the remote control to dial out the last dialed phone number. 2. BT PHONE Adjust the Volume During conversation in progress, tune the Volume switch until you reach the desired volume level. Once connecting is complete, you may access the following function. Some of the below mentioned functions only accessible for handset supported with hands-free profile. End/Reject a call In BT phone menu, press the " briefly on the remote control . " button In power off mode, a incoming call or call out to wake up this unit and turn to BT hands-free mode, when the phone call ended the unit back to power off mode. -21-