Boss Audio BV9758BI User Manual - Page 9

Access setup interface Click [Setting] icon on main interface to access setup interface. General setting Click icon on setup interface to access general setting interface, as shown in below PIC 1 diagram: In General setting interface, you may set the functions On or Off, or click the icon [ ]to preview the wallpapers up and down and set your favorite wallpaper Wallpaper Touch the icon[ PIC 1 ]in wallpaper bar[ ]to change the wallpaper. Audio setting Click icon on setup interface to access audio setting interface, as shown in right (PIC 2) diagram: You can turn on or turn off the existing functions on audio setting interface and adjust the rearview volume. Video setting Click icon on setup interface to access video setting interface, as shown in right (PIC 3) diagram: At video setting interface, you can adjust brightness, contrast, saturation and hue of the video. Language setting During use, you can select your familiar language to display menu by language setup. Click icon on setup interface to access language setting interface, as shown in right (PIC 4) diagram: In the languagebar [ ] you need to set, touch the correspondingicon[ ]to select your familiar language. Time setting Click icon on setup interface to access time setting interface.as shown in right (PIC 5) diagram: Touch the icon [ ]of Time mode, Year, Month, Date, Hour, Minute for setting. PIC 2 PIC 3 PIC 4 PIC 5 14 Turn on/off When the ignition switch is put in ACC or ON position, Press power button on the front panel to turn on the unit. After the host starts, hold power button for 3 seconds, the host will turn off. Access main interface Turned on, the interface to return the icon to switch to the main interface. As shown below: Touch the function icons so as to access the corresponding function operations. Touch the [ ] icon or use the touch pen/finger gently sliding around the screen to switch to the main menu page. USB/SD Card Operation When there is a USB device/SD card connected, the unit can conduct the playback of audio/video/image files in the USB device/SD card. Insert/Eject USB storage device 1. Connect a U disc recorded with media information to the unit by a USB connecting cable. 2. When there is a need to eject the USB device, exit the USB device playback screen first, and then take out the device. Insert/eject SD card 1. Insert a SD card recorded with media information into the SD card slot in the unit correctly until it is locked. 2. When pulling out the SD card, exit SD card playing state first, then press the SD card and it shall pop up after unlocking. Enter/exit Insert a USB storage device or SD card to automatically play data contained in it. If the unit has connected with a USB device or SD card, touch [USB] icon in the multimedia interface to enter into the external storage playback interface; Touch [SD] icon to enter into the SD card playback interface. During playback, touch the top center area of the screen to pop up the touch menu, operate touch menu to perform various playback controls. Play After SD card/USB removable device being read out, the operation methods are similar to disk operation methods. 07