Boss Audio BV9965 User Manual - Page 7

ST. Wheel setting 1. Click on the [ ] icon in the main interface into the SWC. settings interface. 2. The original vehicle to the control line positive, negative with the machine control line in the positive and negative connection. 3. Click the SWC buttons will appear corresponding operating tips, and fundamental operation prompts the SWC feature set. 4. Set function to save the settings and click the Confirm icon to confirm. Note: To modify function settings, repeat procedures 3~4. To reset functions, click Reset icon, all the settings set before shall be cleared, repeat procedures 3~4 for resetting. External input operation Connect the video input plug with external video input jack, and connect the audio input plug with external audio input jack. Touch [AUX-IN] icon on main interface to access external AUX-IN interface. angle up angle down Audio →You can adjust the volume, bass, pitch for input audio. You can adjust the speaker volume by adjusting the front and back, left and right column. Video →You can adjust the brightness, contrast, saturation and hue for input video. You can also choose the video standard mode. Note: To adjust the angle of the screen, "Angle Up" and "Angle Down" are marked respectively in each location for different sources. Calendar Touch the icon [ ] in main interface to enter thefollowing Calendar interface: Calculator Touch the icon [ ]in main interface to enter calculator interface to operate 11 Other Operation Rear view function In any running state, the video signal can switch to reverse video state when reversing the car, and the system shall return to its initial running state after reversing the car. Warning Do not rely on CCD system completely, please make sure you use direct eyesight while driving. Back rearview system only assists in driving. As the distance range of rearview system is limited, completely relying on the rearview system during driving may cause accidents. Reverse field simulation Rearview backup image 12