Boss Audio BV9965 User Manual - Page 8

Access setup interface Click [Setting] icon on main interface to access setup interface. General setting Click icon on setup interface to access general setting interface, as shown in below PIC 1 diagram: In General setting interface, you may set the functions On or Off, or click the icon [ ]to preview the wallpapers up and down and set your favorite wallpaper Wallpaper Touch the icon[ PIC 1 ]in wallpaper bar[ ]to change the wallpaper. Audio setting Click icon on setup interface to access audio setting interface, as shown in right (PIC 2) diagram: You can turn on or turn off the existing functions on audio setting interface and adjust the rearview volume. Video setting Click icon on setup interface to access video setting interface, as shown in right (PIC 3) diagram: At video setting interface, you can adjust brightness, contrast, saturation and hue of the video. Language setting During use, you can select your familiar language to display menu by language setup. Click icon on setup interface to access language setting interface, as shown in right (PIC 4) diagram: In the languagebar [ ] you need to set, touch the correspondingicon[ ]to select your familiar language. Time setting Click icon on setup interface to access time setting interface.as shown in right (PIC 5) diagram: Touch the icon [ ]of Time mode, Year, Month, Date, Hour, Minute for setting. PIC 2 PIC 3 PIC 4 PIC 5 13 INSTRUCTIONS Version Touch the icon [ ]in setting interface to enter the interface below to check the software version number of DISC/MCU/TFT (The version information is displayed please prevail in kind.) Touch calibration If the touch position is biased, you may touch the icon "Calibrate" for calibration. Touch the icon[ ]in setting interface to find the setting bar[ ], and then touch any icon[ ]to enter the following calibrating interface. 十 Touching methods Use touch pen to click the center of "+" icon, and move along with center of "+" icon so as to calibrate the screen. It shall automatically save data and exit after screen calibration. Please accurately click all positions on screen, or the accuracy of touch calibration shall be affected. 14