Boss Audio BVML9384 User Manual - Page 10

Settings 1. Popular OE steering wheel functions are already pre-programmed from the factory. If your vehicle does not support the exact same functions already pre-programmed, you will need to clear / reset the SWC interface and program in the exact functions of your vehicle. To clear / reset the SWC interface, touch [ Reset ] icon. 2. To begin programming the SWC interface after it has been cleared / reset, press a number 1 ~ 12, then press a function. A check mark should appear corresponding to the number and function. Continue programming in this manner until all of the OE steering wheel control functions are completed. NOTE: Functions 1 ~ 12 must be assigned to a function on the OE steering wheel. For example, if the OE steering wheel does not support Preset + and Preset -, then these functions must be cleared / reset in order for the other functions to work correctly. 3. To "learn" the programming completed in step 2 above, touch the [ Learn ] icon. You will then be prompted to push each button on the OE steering wheel (for 1 second), so the unit can learn the corresponding function. 4. SWC learning / programming is now complete. 5. Touch [ ] to exit. Audio Settings 1. Touch [ ]. 2. Touch an option repeatedly to select. Audio Settings Subwoofer Subwoofer Filter Loudness Options On Off 80Hz 120Hz 160Hz On Off Description Turn On the subwoofer. Turn Off the subwoofer Select a crossover frequency to set a cut-off frequency for the subwoofer's LPF (low-pass filter). Turn On the loudness Turn Off the loudness Time Settings 1. Touch [ ]. 2. Touch an option repeatedly to select. Time Settings Date Clock Format Time Options Description Y/M/D Touch [ ] or [ ] to set year, month and day. 24Hr/12Hr Touch [ 24Hr ] or [ 12Hr ] to switch clock mode. H/M Touch [ ] or [ ] to set hour and minutes. NOTE: When date/time is set, touch [ Save ] to confirm or [ Cancel ] to exit. 9