Boss Audio BVML9384 User Manual - Page 9

Settings System Settings 1. Press the [ MENU ] button on the front panel or [ SRC ] on the remote control to display the playing source menu. 2. Touch the Settings icon [ ] and the settings menu is displayed. General Settings 1. Touch [ ], if necessary. 2. Touch to highlight a setting to display/select an option. General Settings Options Description Radio Region USA/Asia/Japan/Europe/Europe LW/Oirt Select one that matches your location. Radio Range Distance Local Select Local to receive only stations with extremely strong signal. Beep On Turn-ON the beep sound. Each time you press a button, the unit beeps. Off Turn-OFF the beep sound. Key Color Choose the backlight color of the buttons. Calibration Start Calibrate the touch screen. Shortcut Set the shortcut. SWC Enter to SWC interface Load Factory Restore to default settings. Calibration When the touch operation is not sensitive or valid, you should calibrate the touch screen using the calibration setting function. Adjust the response positions of the touch panel as followings: 1. Touch [ Start ] to enter. 2. Touch [ Cancel ] to exit. 3. Press and hold the center of [ + ] for 2 seconds, the [ + ] will move automatically. 4. Aim at center of [ + ], follow the path as shown in the figure. Once steps 1-5 are complete, touch [ OK ] to exit calibrating mode. SWC Programing The following controls are available for most vehicles: 1 Volume + 7 Home 2 Volume - 8 Preset + 3 Mute 9 Preset - 4 Next 10 Band 5 Prev 11 Source 6 Play 12 Answer Touch [ Enter ], the SWC menu will display. Up to 12 steering wheel control functions can be programmed via the built-in SWC interface. Not all functions may be supported for each vehicle. 8