Bowflex Xtreme SE Assembly Manual - Page 13
Install.Pulley.., Install.Squat.Pulley.Frame
View all Bowflex Xtreme SE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Assembly Guide Step 5 Install Squat Pulley Frame Button Head Screws Flat Washers Parts: • Squat Pulley Frame Assembly • Main Assembly Squat Pulley Frame Hardware: • 1 Button Head Screw (3/8" X 5") • 1 Nylock Nut (3/8") • 2 Button Head Screws (3/8" X 1") • 4 Washers (3/8") Tools: 7/32" Hex Wrench & Adjustable . or Socket Wrench 5-1 P lace the Squat Pulley Frame behind the Seat Support Rail and align the top screw holes. Secure using a 3/8" X 5" screw, washer and nut in the top hole as shown. 5-2 I nstall screws and washers into the bottom holes of the Squat Pulley Frame as shown. Flat Washers Nylock Nut Button Head Screw Step 6 Install Pulley . Arms Parts: • Right Pulley Arm • Left Pulley Arm • Main Assembly Hardware: • 4 Washers (3/8") • 4 Button Head Screws . (3/8" X 3/4") Tools: 7/32" Hex Wrench 6-1 S lide Left and Right Pulley Arms onto the connectors on the base frame as shown. 6-2 S ecure Pulley Arms to Base Frame using screws and washers as shown. Finger tighten screws at this time. Left Pulley Arm Right Pulley Arm 3QUATPULLEYFRAMENOTSHOWNFORCLARITY Washers Button Head Screws 3QUATPULLEYFRAMENOTSHOWNFORCLARITY Button Head Screw Base Frame & Lower Lat Tower Assembly Button Head Screw Flat Washers Bowflex Xtreme® SE Assembly Manual 10