Bowflex Xtreme SE Assembly Manual - Page 17
Upper.Lat.Tower.Assembly, Install.Seat.Back.Pad - xtreme seats
View all Bowflex Xtreme SE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Assembly Guide Step 13 Install Seat Back Pad Note: T he back of the Seat Back Pad has two pairs of holes. Select the appropriate . set based on your height. Parts: • Seat Back Pad • Main Assembly Hardware: • 2 Button Head Screws (5/16" X 2 1/2") • 2 Washers (5/16") Tool: 3/16" Hex Wrench 13-1 Position Seat Back Pad against the . Seat Support Rail and align the . screw holes for your height with . those on the Seat Support Rail. 13-2 Secure Seat Back Pad to the Seat Support Rail using screws and . washers as shown. Step 14 Upper Lat Tower Assembly Parts: • Upper Lat Tower • Lat Cross Bar Hardware: • 2 Button Head Screws (3/8" X 3") • 2 Washers (3/8") • 2 Nylock Nuts (3/8") Tool: 7/32" Hex Wrench and Adjustable Wrench 14-1 Align the two holes on the Lat Cross Bar with those on the Upper Lat Tower as shown. 14-2 Secure using washers and screws as shown.. Flat Washers Upper Lat Tower Lat Cross Bar Button Head Screws Bowflex Xtreme® SE Assembly Manual 14