Brother International 1940CN Software User Guide - Page 145
Configuring Network Scanning
UPC - 012502610908
View all Brother International 1940CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
Configuring Network Scanning (For Network models only) If you want to scan from the machine on a network, you must select the networked machine in the Device Selector application located in Macintosh HD/Library/Printers/Brother/Utilities. If you already installed the MFL-Pro Software following the network installation steps in the Quick Setup Guide then this selection should already be made. To use the machine as a Network Scanner, the machine must be configured with a TCP/IP address. You can set or change the address settings from the control panel. (Please see the Network User's Guide on the CD-ROM.) Max. 25 clients can be connected to one machine on a Network. For example, if 30 clients try to connect at a time, 5 clients will not be shown on the LCD. (Network scanning is not available for the DCP-110C.) (The ControlCenter2.0 is not available for Mac OS® 8.6-9.2.) 1 From Library, select Printers, Brother, Utilities and DeviceSelector, and then doubleclick DeviceSelector. The DeviceSelector window appears. This window can also be opened from the ControlCenter2.0. 2 Select Network from the connection type pull-down menu. USING YOUR MACHINE WITH A MACINTOSH® 8 - 21