Brother International 2460N Users Manual - English - Page 141
the Network User, Connect one end of the Ethernet Cable to the Network port of the printer.
UPC - 012502600787
View all Brother International 2460N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
☛ 5. CHAPTER 4 OPTIONS Insert the network board connector firmly into the connector of the main controller board, and then secure it with the two screws. Fig. 4-7 ☛ 6. Secure the metal plate with the three screws in the order shown. z y ☛ 7. Close the side cover. x Fig. 4-8 ☛ 8. Connect one end of the Ethernet Cable to the Network port of the printer. ☛ 9. Plug the power cord into the AC outlet, and then turn on the power switch. ☛ 10. For more details about how to optimize the Network board, please refer to the Network User's Guide on the CD-ROM supplied with this printer. 4-9
CHAPTER 4 OPTIONS
4–9
☛
5.
Insert the network board connector firmly into the connector of the main
controller board, and then secure it with the two screws.
Fig. 4-7
☛
6.
Secure the metal plate with the three screws in the order shown.
Fig. 4-8
☛
7.
Close the side cover.
☛
8.
Connect one end of the Ethernet Cable to the Network port of the printer.
☛
9.
Plug the power cord into theAC outlet, and then turn on the power switch.
☛
10.
For more details about how to optimize the Network board, please refer to
the Network User
’
s Guide on the CD-ROM supplied with this printer.
①
③
②