Brother International 2460N Users Manual - English - Page 237
Bar Code Human Readable Line On or Off, Quiet Zone, Bar Code, Expanded Character Unit
UPC - 012502600787
View all Brother International 2460N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 237 highlights
♦ Bar Code Human Readable Line On or Off n = "r0" or "R0" Human readable line OFF n = "r1" or "R1" Human readable line ON Default: Human readable line ON (1) "T5" or "t5" (2) "T6" or "t6" (3) "T130" or "t130" (4) "T131" or "t131" Default: Human readable line OFF All others This parameter specifies whether or not the printer prints the human readable line below the bar code. Human readable characters are always printed with OCR-B font of 10 pitch and all the current character style enhancements are masked. Note that the default setting is subject to the bar code mode selected by "t" or "T". ♦ Quiet Zone n = "onnn" or "Onnn" (nnn = 0 ~ 32767) Quiet Zone is the space on both sides of the bar codes. Its width can be specified using the units that are set by the "u" of "U" parameter. (For the description of "u" or "U" parameter, see the next section.) The default setting of Quiet Zone width is 1 inch. ♦ Bar Code, Expanded Character Unit, Line Block Drawing & Box Drawing n = "u0" or "U0" n = "u1" or "U1" n = "u2" or "U2" n = "u3" or "U3" n = "u4" or "U4" n = "u5" or "U5" n = "u6" or "U6" n = "u7" or "U7" Millimeters (default) 1/10" 1/100" 1/12" 1/120" 1/10 Millimeters 1/300" 1/720" This parameter specifies the measurement units of X-axis offset, Y-axis offset, and bar code height. Appendix-38