Brother International 2580C Users Manual - English - Page 114
Black Start, Color Start, Stop/Exit, Error Message, Cause, Action, Near Empty, No Caller ID
UPC - 012502618386
View all Brother International 2580C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Troubleshooting and Routine Maintenance Error Message Cause Action Near Empty One or more of the ink cartridges are running out of ink. If a sending machine has a color fax, the machine's 'handshake' will ask that the fax be sent as black and white. If the sending machine has the ability to convert it, the color fax will be received into memory as a black and white fax. Order a new ink cartridge. (See Ordering accessories and supplies on page iii.) No Caller ID There is no incoming call history. You did not receive calls or you have not subscribed to the Caller ID service from your telephone company. If you want to use the Caller ID feature call your telephone company. (See Caller ID on page 45.) No Cartridge An ink cartridge is not installed properly. Take out the ink cartridge and put it in again seating it properly. (See Replacing the ink cartridges on page 104.) No Paper Fed The machine is out of paper or paper is not properly loaded in the paper tray. Do one of the following: Refill the paper in the paper tray, and then press Black Start or Color Start. Remove the paper and load it again and then press Black Start or Color Start. The paper is jammed in the machine. See Printer jam or paper jam on page 102. No The number you dialed does not Response/Busy answer or is busy. Verify the number and try again. Not Registered You tried to access a One-Touch or Set up the One-Touch or Speed Dial number. Speed Dial number that is not (See Storing Speed-Dial numbers on page 54.) programmed. Out of Memory The machine's memory is full. Press Stop/Exit and wait until the other operations in progress finish and then try again. Paper Jam Paper is jammed in the machine. See Printer jam or paper jam on page 102. Print Unable XX The machine has a mechanical problem. -OR- A foreign objects such as a clip or ripped paper is in the machine. Open the scanner cover and remove any foreign objects inside the machine. If the error message continues, do one of the following: (FAX-2480C) See Transferring your faxes or Fax Journal report on page 101 before disconnecting the machine, so you will not lose any important messages. Then, disconnect the machine from the power for several minuites and then reconnect it. (FAX-2580C) Disconnect the machine from the power for several minuites, then reconnect it. (The machine can be turned off for approximately 24 hours without losing faxes stored in the memory. See Transferring your faxes or Fax Journal report on page 101.) 99