Brother International 8060P Owners Manual

Brother International 8060P - FAX B/W Laser Manual

Get Brother International 8060P - FAX B/W Laser PDF manuals and user guides View all Brother International 8060P manuals
Add to My Manuals
Save this manual to your list of manuals

Brother International 8060P manual content summary:

  • Brother International 8060P | Owners Manual - Page 1
    OWNER'S MANUAL FAX-8060P MFC-9060 ®
  • Brother International 8060P | Owners Manual - Page 2
    in another country. Congratulations on purchasing your Brother Fax machine. Please set up your machine as follows - refer to the Owner's Manual for further information. 1. Check the Packing List 2. Install the Drum Unit 3. Install the Phone Line and Power Cord 4. Attach
  • Brother International 8060P | Owners Manual - Page 3
    in This Manual 2 About Fax Machines 2 Fax Tones and Handshake 2 ECM (Error Correction Mode 3 FAX-8060P Control Panel Overview 4 MFC-9060 Control Panel Overview 6 Packing List 9 Choosing a Location 10 Caution 11 Assembly 11 Install the Drum Unit Assembly (with Toner Cartridge 11 Setting
  • Brother International 8060P | Owners Manual - Page 4
    40 Printing a Reduced Incoming Document 40 Reception into Memory 41 Setting the Print Density 42 Toner Save 42 Advanced Receiving Operations 43 Operation from an External or Extension Telephone 43 For Fax/Tel (F/T) Mode Only 44 Changing Remote Codes 44 To change Remote Codes 44 Printing
  • Brother International 8060P | Owners Manual - Page 5
    Quick-Dial Numbers 8Telephone (Voice) Operation Before You Begin 49 Resolution 50 Contrast 50 Automatic Transmission 51 Manual Transmission (with an External Telephone 51 Fax Redial 51 Dual Access 51 Real Time Transmission 52 Basic Sending Operations 53 Composing an Electronic Cover Page
  • Brother International 8060P | Owners Manual - Page 6
    88 Connecting the machine to Your Computer 88 Installing the Brother Drivers Using Windows® 95, 98 and 98SE 89 Installing the Brother Drivers Using Windows® 2000 Professional 93 Installing the Brother Drivers Using Windows NT® Workstation Version 4.0 97 Installing the Brother Software 103 To
  • Brother International 8060P | Owners Manual - Page 7
    the Machine as a Printer (For MFC-9060 only) 14Using the Windows®- Based Brother Control Centre (For MFC-9060 only) Special Printing Features 107 Windows® Printing 107 Enhanced Memory Management 107 Printing From Your PC 108 Multi-Purpose Sheet Feeder 108 Loading Envelopes 108 Manual Feed
  • Brother International 8060P | Owners Manual - Page 8
    Troubleshooting 137 Error Messages 137 Document Jam 140 Printer Jam 140 If You Are Having Difficulty with Your Machine 143 Packing and Shipping the Machine 147 Regular Maintenance 149 Cleaning the Scanner 149 Cleaning the Printer 150 Cleaning the Drum Unit 151 Replacing the Toner
  • Brother International 8060P | Owners Manual - Page 9
    vii T A B L E O F C O N T E N T S Glossary 165 Index ...169 Accessory List 173
  • Brother International 8060P | Owners Manual - Page 10
    viii T A B L E O F C O N T E N T S
  • Brother International 8060P | Owners Manual - Page 11
    a Brother fax machine. This machine has been designed to be simple to use, with LCD screen prompts to guide you through functions. However, you can use your machine to its fullest potential by taking a few minutes to read this manual. Additionally, your machine has a Help Key. Press Help (FAX-8060P
  • Brother International 8060P | Owners Manual - Page 12
    Symbols Used in This Manual Note or additional information. The machine may be damaged or may not work correctly if this is not observed. Warnings detail precautions you must take to avoid possible personal injury. About Fax Machines If you're a first-time fax machine user, fax operation may seem
  • Brother International 8060P | Owners Manual - Page 13
    . Pay special attention to the directions in the Installation chapter for connecting a TAD (or answering machine) to your fax machine. ECM (Error Correction Mode) The Error Correction Mode (ECM) is a way for the fax machine to check the integrity of a fax transmission while it is in progress. ECM
  • Brother International 8060P | Owners Manual - Page 14
    4 CHAPTER ONE FAX-8060P Control Panel Overview 54 3 2 1 16 15 14 13 68 9 7 10 11 12 1 Liquid Crystal Display Displays messages to help you set up and operate your machine. 2 Menu Lets you access the function and programming mode. 3 Tel (Telephone) This key is used to have a telephone
  • Brother International 8060P | Owners Manual - Page 15
    the last number called. Also inserts a pause in autodial numbers. 9 Dial Pad Dials phone and fax numbers and can be used as a keyboard for entering information into the machine. 10 Fax Keys: Mode Select how the fax machine will handle incoming calls. Broadcast Use this key when you want to send
  • Brother International 8060P | Owners Manual - Page 16
    6 CHAPTER ONE MFC-9060 Control Panel Overview 54 3 2 1 16 15 14 13 68 9 7 10 11 12 1 Liquid Crystal Display Displays messages to help you set up and operate your machine. 2 Menu Lets you access the function and programming mode. 3 Tel (Telephone) This key is used to have a telephone
  • Brother International 8060P | Owners Manual - Page 17
    and fax numbers and can be used as a keyboard for entering information into the machine. 10 Fax Keys: Mode Select how the fax machine will printed. 14 Printer Key: Job Cancel Clears data from the printer memory. 15 Set/Verify Stores a function setting into the machine. When the machine is idle
  • Brother International 8060P | Owners Manual - Page 18
    8 CHAPTER ONE
  • Brother International 8060P | Owners Manual - Page 19
    Cover Multi-purpose Sheet Feeder Drum Unit Assembly (with free Starter Toner Cartridge) Document Tray Paper Tray IEEE-1284 Compliant Bi-directioned Cable (For MFC-9060 Only) Printer Drive Floppy Disk* Owner's Manual CD-ROM (For MFC-9060 Only) Whenever you transport the machine, use the packing
  • Brother International 8060P | Owners Manual - Page 20
    T W O Choosing a Location Place your fax machine on a flat, stable surface, such as a desk. Select a place that is free of vibration and shocks. Locate the machine near a telephone wall socket and a standard earthed electrical socket, grounded power outlet. Avoid placing your machine where it may be
  • Brother International 8060P | Owners Manual - Page 21
    from lightning. 4 Do not use the telephone to report a gas leak in the vicinity of the leak. Assembly Install the Drum Unit Assembly (with Toner Cartridge) 1 Unpack the drum unit assembly, including the toner cartridge, and gently rock it from side to side five or six times. To prevent damage to the
  • Brother International 8060P | Owners Manual - Page 22
    12 C H A P T E R T W O Do NOT remove starter sheet. 2 Open the top cover of the machine. Top Cover 3 Holding the drum unit by its handles, insert it in the machine.
  • Brother International 8060P | Owners Manual - Page 23
    4 Close the top cover. 13 I N S T A L L A T I O N Setting Up the Machine Follow the instructions below to connect power cord, and telephone line. (Example for the U.K.) EXT. LINE 1 Connect the power cord.
  • Brother International 8060P | Owners Manual - Page 24
    . It must only be connected with a SELV circuit; only the MFL Pro for Fax cable kit (available in an option pack), satisfies this requirement. NOTICE: s This machine must be fitted with an earthed plug. s Since the machine is earthed via the mains plug, you can protect yourself from potentially
  • Brother International 8060P | Owners Manual - Page 25
    15 I N S T A L L A T I O N 3 Attach the wire extensions to the Multi-purpose Sheet Feeder, and to the document guide base. 4 Attach the document and paper trays to the machine, and pull out their extensions. Loading Paper 1 Open the Multi-purpose Sheet Feeder cover.
  • Brother International 8060P | Owners Manual - Page 26
    paper well. Load the paper, making sure that the printing surface is towards the fax unit and the paper level is stacked below the triangle mark. The feeder can hold up to 200 sheets of paper. 3 Adjust the guides to fit the paper width. Acceptable Paper Size : A4 (210 mm x 297 mm
  • Brother International 8060P | Owners Manual - Page 27
    for your machine. You can then leave the machine in Fax Only Mode to receive faxes any time of day or night. If you are installing the machine to work , it is recommended that the Answer Mode be set to Manual. All incoming calls should initially be regarded as telephone calls. 3 The unit
  • Brother International 8060P | Owners Manual - Page 28
    cause unsatisfactory service, the most an extension handset. Such problems can easily be eliminated however qualified telephone installation company as FAX INADVISABLE CONNECTION OF EXTENSION SOCKETS Fig. 1. DISCONNECT EXTENSION EXTENSION SOCKET SOCKET MASTER SOCKET INCOMING LINE FAX FAX MACHINE
  • Brother International 8060P | Owners Manual - Page 29
    machine cannot hear CNG tones until the TAD has answered the call, and with four rings there are only 8-10 seconds of CNG tones left for the fax "handshake." Make sure you carefully follow instructions in this manual answering problems. Connections 1 You may connect an external TAD to your machine,
  • Brother International 8060P | Owners Manual - Page 30
    example: "After the beep, leave a message or send a fax manually by pressing 51 and Start" Please note that some faxes that are sent manually cannot be received automatically because some fax machines do not send a fax tone if the call is manually dialled. In these cases you must inform callers that
  • Brother International 8060P | Owners Manual - Page 31
    3C H A P T E R T H R E E On-Screen Programming 21 User-Friendly Programming See "Using This Manual" chap. 1 We have designed your fax machine with on-screen programming and a Help key. User-friendly programming helps you take full advantage of all the functions your machine has to offer. Since
  • Brother International 8060P | Owners Manual - Page 32
    option, and a help message giving brief instructions about how to proceed. The display you'll FAX: NO. & START COPY: PRESS COPY Function Selection Table If you have a basic understanding of how to program your machine, you can perform most of the programming settings without the Owner's Manual
  • Brother International 8060P | Owners Manual - Page 33
    DENSITY Adjusts printing to be lighter or -- 5 darker. 8. POLLING RX You call another fax machine to -- 5 receive a fax from it. 9. TONER SAVE Increase life of toner cartridge. OFF 5 3. SETUP SEND Function Description Factory Set Chapter 1. COVERPG SETUP Automatically sends a OFF
  • Brother International 8060P | Owners Manual - Page 34
    SEND (continued) Function Description 8. POLLED TX 9. REAL TIME TX Set Polled Transmission for someone to poll your fax machine to receive a fax from you. NEXT FAX ONLY/ON/OFF Factory Set Chapter -- 6 OFF 6 4. REMAINING JOBS Function Description Factory Set Chapter Cancel a delayed
  • Brother International 8060P | Owners Manual - Page 35
    . 6. MEMORY STATUS Lists information about memory use. Factory Set Chapter -- 10 -- 10 8. REMOTE FAX OPT Function Description 1. FAX FWD Set your fax machine to forward faxes. 2. FAX STORAGE Store incoming faxes in memory for remote retrieval. 3. REMOTE ACCESS Set code for retrieving
  • Brother International 8060P | Owners Manual - Page 36
    26 C H A P T E R T H R E E
  • Brother International 8060P | Owners Manual - Page 37
    displays the date and time, and prints it on every fax you send. In the event of a power failure, the machine maintains date and time information for about 12 hours. All other settings remain unaffected. 1 Press Menu, 1, 2. The screen prompts you to enter the year. ENTER YEAR:XX 2 Enter the last
  • Brother International 8060P | Owners Manual - Page 38
    enter 09 for September, or 10 for October). The screen displays your entry. 5 Press Set. The screen prompts you to enter the day. ENTER DAY:XX 6 as appropriate. As an example, your machine is installed in the United Kingdom, is to be used for both fax and voice calls, and your national telephone
  • Brother International 8060P | Owners Manual - Page 39
    telephone number. TEL: 4 Enter your telephone number (up to 20 digits). If your telephone number and fax number are the same, enter the same number again. The screen displays your entry. 5 Press Set. The screen prompts you to enter your name or your company name. NAME: 6 Use the dial pad to enter
  • Brother International 8060P | Owners Manual - Page 40
    30 C H A P T E R F O U R Entering Text When you are setting certain functions, such as the Station ID, you may need to enter text into the machine. Most keys on the dial pad have three or four letters printed above them. The keys for 0, #, and don't have printed letters because they are
  • Brother International 8060P | Owners Manual - Page 41
    Exchange (PABX). Your fax can be connected to most types of PABX. The recall facility on your fax machine supports timed break recall only One Touch or Speed Dial number (Function menu 6-1 or 6-2) press R first (the screen displays "!"), then enter the telephone number. If you do this, you do not
  • Brother International 8060P | Owners Manual - Page 42
    easily let the machine's clock gain or lose one hour by using this feature. 1 Press Menu, 1, 6. The screen displays TO machine is idle. You can choose how long the machine is idle (from 00 to 99 minutes) before it drops into sleep mode. The timer automatically resets when the machine receives a fax
  • Brother International 8060P | Owners Manual - Page 43
    SETUP and COVERPAGE NOTE (from SETUP SEND) functions are stored permanently. TX Lock This feature allows you to prevent unauthorised access to the fax machine. When switched ON, TX Lock prohibits most functions. The following functions listed are available while TX Lock is switched ON. s Receiving
  • Brother International 8060P | Owners Manual - Page 44
    the password. PASSWORD:XXXX ENTER & SET 8 Enter a 4-digit password, followed by Set. This is the same as the security password of your machine already stored. The screen displays ACCEPTED for 2 seconds, followed by TX LOCK MODE - TX Lock is now switched ON. If the password you enter at Step 8 is
  • Brother International 8060P | Owners Manual - Page 45
    prompts you to enter the new password. NEW PASSWD:XXXX ENTER & SET 6 Enter a 4-digit number as a new password. 7 Press Set. The screen prompts you to re-enter the new password. VERIFY:XXXX ENTER & SET 8 Enter the new password again and press Set. 9 Press Stop to exit. Switching
  • Brother International 8060P | Owners Manual - Page 46
    the security password of your machine already stored. The screen displays ACCEPTED for 2 seconds at Step 4 is incorrect, the screen would display WRONG PASSWORD. After 2 Menu. The screen prompts you to enter the password, followed by at Step 2 is incorrect, the screen would display WRONG PASSWORD. After
  • Brother International 8060P | Owners Manual - Page 47
    receive modes for your machine. You may choose the mode that best suits your needs by pressing Mode repeatedly until the screen displays the setting you want to use. You'll need to connect an external telephone to select Fax/Tel (F/T) or Manual Mode. Answer Mode For 1. MANUAL ( ) with an External
  • Brother International 8060P | Owners Manual - Page 48
    answers, the machine listens for fax tones. If it detects fax tones, fax messages are FAX FAX: FAX ONLY F/T: FAX/TEL TAD: EXTERNAL ANSWERING DEVICE MAN: MANUAL To select or change your Answer Mode 1 Press Mode. The screen displays your current selection. FAX ONLY FAX/TEL TAD:ANSWER MACH. MANUAL
  • Brother International 8060P | Owners Manual - Page 49
    ring to alert you that you have a voice call. 3 Press Set when the screen displays your selection. RING TIME:30 SEC 4 Press Stop to exit. Now, when a call comes in and the machine is set to Fax/Tel (F/T) Mode, all phones on this line will ring the number of times you selected in
  • Brother International 8060P | Owners Manual - Page 50
    seconds. When you see RECEIVE on the fax screen or when you hear "chirps" through the handset of an extension phone connected to another wall socket, just replace the handset, and your machine does the rest. Selecting ON allows the machine to receive fax calls automatically, even if you lift the
  • Brother International 8060P | Owners Manual - Page 51
    place, and you will get the same size recorded as the original. Reception into Memory As soon as the paper cassette becomes empty during fax reception, the screen will display CHECK PAPER; please put some paper in the paper cassette (see chap. 1). If the MEMORY RECEPTION setting is ON at this time
  • Brother International 8060P | Owners Manual - Page 52
    . Each key press changes the print density to the next setting. 3 When the screen shows the setting you want, press Set. 4 Press Stop to exit. Toner Save You can conserve toner using this feature. When you set Toner Save to ON, print appears somewhat lighter. The default setting is OFF. 1 Press
  • Brother International 8060P | Owners Manual - Page 53
    . At the machine phone, press Start, then hang up. At an extension phone, press 5 1, wait for fax receiving tones (chirps), then hang up. At an external phone, press 5 1 and wait for the phone to be disconnected (the screen displays RECEIVE) before you hang up. (Your caller will have to press Start
  • Brother International 8060P | Owners Manual - Page 54
    on the line, or if someone wants to send you a fax, send the call back to the machine by pressing 5 1. Changing Remote Codes Remote Codes might not or to select ON (or OFF). REMOTE ACT.:ON 3 Press Set when the screen displays the setting you want. 4 If you want to, enter a new Remote Activation
  • Brother International 8060P | Owners Manual - Page 55
    sure you reset this function. s To have your external TAD answer only the main number, the machine must be in Manual Mode. s In Fax/Tel (F/T) or Fax Only mode, the machine will answer all numbers on the phone line. Set the BT Call Sign 1 Set the machine to Manual mode. 2 Press Menu, 0, 2. The screen
  • Brother International 8060P | Owners Manual - Page 56
    Polling only with another Brother fax machine. Your four-digit ID number must be entered on the fax machine that polls for your documents. Setup for Polling Receive Polling Receive is when you call another fax machine to receive a fax from it. 1 Press Menu, 2, 8. The screen displays POLLING:STANDARD
  • Brother International 8060P | Owners Manual - Page 57
    a four-digit number. This should be the same as the security code of the fax machine you are polling. 5 Press Set. The screen prompts you to enter the fax number you want to poll, and then to press Start. ENTER FAX NO. THEN PRESS START 6 Press Start. Setup Delayed Polling Receive You can set your
  • Brother International 8060P | Owners Manual - Page 58
    48 C H A P T E R F I V E 6 Press Set. The screen prompts you to enter the fax number you are polling. ENTER FAX NO. THEN PRESS START 7 Enter the fax number (you can use One Touch or Speed Dial, or dial manually). 8 Press Start. The machine makes the polling call at the time you entered. You can set
  • Brother International 8060P | Owners Manual - Page 59
    face down, top edge first. s Adjust the paper guides to fit the width of your document. Paper Guides See "Resolution" in this chapter s The automatic document feeder (ADF) can hold up to 20 pages, feeding each one individually through the fax machine. Use standard (64 g/m2~90 g/m2) paper when
  • Brother International 8060P | Owners Manual - Page 60
    displays your selection, press Set. The screen displays ACCEPTED NEXT 1.YES 2.NO 5 Press 2 if you are finished choosing settings, and go to Step 6. -- OR-- Press 1 if you want to select additional settings. The display returns to SETUP SEND menu. 6 Enter a fax number and press Start to send a fax.
  • Brother International 8060P | Owners Manual - Page 61
    cradle of the external telephone. Fax Redial If you're sending a fax manually and the line is busy, you can retry the number by pressing Redial/Pause. 1 Press Redial/Pause. 2 Press Start. If you're sending a fax automatically and the line is busy, the machine will automatically redial up to 4 times
  • Brother International 8060P | Owners Manual - Page 62
    empty. 2 Place the document in the feeder. 3 Enter the fax number. 4 Press Start. The machine starts scanning the document and the screen displays the job number (#XX) of the fax, and how much memory is available. When the machine starts dialling you can immediately repeat Steps 1 through 4 for the
  • Brother International 8060P | Owners Manual - Page 63
    Composing an Electronic Cover Page The cover page is sent to the receiving party's machine. Your cover page includes the name stored in the One Touch or Speed Dial start the call. If you're dialling manually, the name is left blank. The cover page indicates the fax is from your Station ID, and the
  • Brother International 8060P | Owners Manual - Page 64
    the Station ID. You can set the machine to send a cover page with a particular document. This cover page will include the number of pages in your document. 1 Insert the document in the feeder. 2 Press Menu, 3, 1. 3 Press Set when the screen displays NEXT FAX ONLY. 4 Press or to select ON (or
  • Brother International 8060P | Owners Manual - Page 65
    is always sent when you send a fax.) 4 If you selected ON, the screen displays the cover page comment options. Press or to view comment selections. 1.NOTE OFF 2.PLEASE CALL 3.URGENT 4.CONFIDENTIAL 5. (user defined) 6. (user defined) 5 Press Set when the screen displays your selection. The
  • Brother International 8060P | Owners Manual - Page 66
    . 1 Press Menu, 3, 1. 2 Press or to select PRINT SAMPLE. 3 Press Set when the screen displays your selection. 4 Press Start. Your machine prints a copy of your cover page. === COVER PAGE === TO: FROM: FAX: TEL: PAGE[S] TO FOLLOW COMMENT: See "Entering Text" chap. 4 Cover Page Message You can
  • Brother International 8060P | Owners Manual - Page 67
    numbers, problems can be experienced. This mode makes the machine work better for such calls. After you send a fax using this feature, the feature turns itself off. 1 Insert the document. 2 Press Menu, 3, 5. 5.OVERSEAS MODE 3 Press or to select ON (or OFF). 4 Press Set when the screen displays your
  • Brother International 8060P | Owners Manual - Page 68
    choosing settings, and go to Step 8. The screen prompts you to enter the fax number you want to call. 8 Enter the fax number, and press Start. 9 If you've set Call Reservation to ON, pick up your external telephone's handset and press Tel if the machine
  • Brother International 8060P | Owners Manual - Page 69
    Set. The screen displays 1.DOC 2.MEMORY 5 Press 1 to select DOC. --OR-- Press 2 to select MEMORY. If you select 1.DOC, the machine will not start FAX-8060P), 8 (MFC-9060) One Touch locations, up to 30 Speed Dial locations, and up to 50 manually dialled numbers (maximum of 96 (FAX-8060P) or 88 (MFC
  • Brother International 8060P | Owners Manual - Page 70
    Enter the next number. Example: Speed Dial 5 Press Broadcast. 6 Enter the next fax number. Example: Manual dialling, using the dial pad. 7 Press Start. Your machine will read the documents into memory and then start sending faxes to all the numbers you entered. s To stop the broadcasting in progress
  • Brother International 8060P | Owners Manual - Page 71
    for Polling Transmit Polling Transmit is when you set up your fax machine to wait with a document so another fax machine can retrieve it. 1 Place document to be retrieved in feeder. 2 Press Menu, 3, 8. 3 The screen displays POLLING:STANDARD SELECT { } & SET 4 Press or to choose STANDARD. 5 Press
  • Brother International 8060P | Owners Manual - Page 72
    must enter the polling ID number. You can use Secure Polling only with another Brother fax machine. 1 Place document in feeder. 2 Press Menu, 3, 8. 3 The screen displays POLLING:STANDARD SELECT { } & SET 4 Press or to choose SECURE, and press Set. 5 Enter a four-digit number and press Set. 1.DOC
  • Brother International 8060P | Owners Manual - Page 73
    choosing settings and go to Step 8. 8 Press Start and wait for the fax to be polled. Cancelling a Job While Scanning the Document You can cancel in memory. If the machine is idle, 1 Press Menu, 4. Any waiting jobs appear on the display. If nothing is waiting, the screen displays NO JOB WAITING.
  • Brother International 8060P | Owners Manual - Page 74
    and Polling Transmit Jobs You can send a fax without cancelling the Timer or Poll Waiting with documents in the feeder by "interrupting" it. When you interrupt the Timer to send a "new" set of documents, the machine will not automatically redial the number if it was busy. Also, you cannot use the
  • Brother International 8060P | Owners Manual - Page 75
    Easy Dialling You can set up your machine to do three types of easy dialling: One Touch, Speed Dial and Groups for Broadcasting of faxes. See "One Touch Dialling" chap. 8 Storing One Touch Dial Numbers You can store 16 (FAX-8060P) or 8 (MFC-9060) fax/phone numbers that you can dial by pressing
  • Brother International 8060P | Owners Manual - Page 76
    select the type you want. FAX TEL F/T a fax only number a telephone (voice) number both a fax and telephone (voice) number 7 Press Set. 8 Return to Step 2 to store another One Touch Dial number. -OR- Press Stop to exit. When you dial a One Touch Dial number, the screen displays the name you've
  • Brother International 8060P | Owners Manual - Page 77
    Speed Dial number in a location where a number is already stored, the screen displays the current name stored there, then prompts you to either change it assign up to 45 (FAX-8060P) or 37 (MFC-9060) numbers to one large Group. You can include up to 15 (FAX-8060P) or 7 (MFC-9060) One Touch locations,
  • Brother International 8060P | Owners Manual - Page 78
    T E R S E V E N 1 Press Menu, 6, 3. The screen displays SELECT ONE-TOUCH 2 Select a One Touch key where you wish to press 0, 9 on the dial pad. The LCD shows 05, #09. G01:*05#09_ 5 Press Set. The screen prompts you to enter a name. NAME: ENTER & SET 6 Use the dial pad and the chart of "Entering
  • Brother International 8060P | Owners Manual - Page 79
    fax machine can be used to make normal telephone calls. You can dial numbers, by using One Touch or Speed Dial memory, or using the dial pad. Manual Dialling with an External Telephone Manual and screen displays NOT ASSIGNED. The display returns to normal after 2 seconds. If you are sending a fax,
  • Brother International 8060P | Owners Manual - Page 80
    Speed Dial number. If you picked up the handset, press Start when the receiving fax machine answers with fax tone. Pause Press Redial/Pause to insert a pause between digits to be dialled. If your fax machine is connected to a PABX, you may need to insert an additional number prefix (e.g. "9") and
  • Brother International 8060P | Owners Manual - Page 81
    O N 3 When the screen displays the name you want to and even include manual dialling using the dial machine returns to pulse dialling service. See "Select Answer Mode" chap. 5 Fax/Tel (F/T) Mode When you share one line for your telephone and fax machine, in the Fax/Tel (F/T) Mode, the fax machine
  • Brother International 8060P | Owners Manual - Page 82
    . Also, if you press Tel when you are talking lifting the external telephone's handset with the other end, you can hear the other end from machine's monitor speaker, but the other end cannot hear you.
  • Brother International 8060P | Owners Manual - Page 83
    STORAGE:OFF SELECT { } & SET 2 Press or to select ON (or OFF). 3 Press Set when the screen displays your selection. 4 Press Stop to exit. If there are faxes in memory when you turn the Fax Storage OFF, the screen prompts you to erase any faxes in memory. ERASE ALL DOC? 1.YES 2.NO If you press 1, all
  • Brother International 8060P | Owners Manual - Page 84
    ON, your fax machine stores the received fax in memory, then dials the fax number you've programmed, and forwards the fax message. 1 Press Menu, 8, 1. 2 Press or to select ON (or OFF). FAX FWD:ON 3 Press Set. The screen prompts you to enter the number of the fax machine where faxes will be forwarded
  • Brother International 8060P | Owners Manual - Page 85
    enter an invalid command, the machine beeps three times. 5 Press 9 0 to reset the machine when you finish. 6 Hang up. If your fax machine is set to Manual Mode, you can access your machine remotely by phoning it and letting it ring for about 100 seconds. Your fax machine will answer the phone after
  • Brother International 8060P | Owners Manual - Page 86
    new number of the remote fax machine where you want your fax messages forwarded, then press # #. Automatically, the machine will turn Fax Forwarding ON. Turn Fax Storage ON--Press 6. Turn Fax Storage OFF--Press 7. Only possible if there are no faxes in memory or all faxes have been erased (by using
  • Brother International 8060P | Owners Manual - Page 87
    pause, press #. 5 After you hear your fax machine beep, hang up and wait. Your fax machine calls the remote fax machine. Your fax machine then sends the Memory Status List to the fax machine that you are calling from. Retrieving Fax Messages 1 Dial your fax machine's number. 2 When you hear the beep
  • Brother International 8060P | Owners Manual - Page 88
    , hang up and wait. Your fax machine calls the remote fax machine. Your fax machine then sends the Memory Status List showing the new forwarding number to the fax machine that you are calling from. 8 Check the forwarding number. If the forwarding number is incorrect, return to Step 1 to reset it.
  • Brother International 8060P | Owners Manual - Page 89
    10C H A P T E R T E N Printing Reports 79 Machine Settings and Journal You can print the following lists and reports: 1.XMIT REPORT If set to ON a Transmission Verification Report is printed after each Fax has been sent. 2.JOURNAL Journal lists information about the last 50 incoming and
  • Brother International 8060P | Owners Manual - Page 90
    pages, resend those pages. When the feature is ON, the report is printed with every fax you send. 1 Press Menu, 7, 1. 2 Press or to select ON or OFF. 3 Press Set. 4 Press Stop to exit. When the machine is idle, you can print the Transmission Verification Report by pressing Verify when you wish to
  • Brother International 8060P | Owners Manual - Page 91
    81 P R I N T I N G R E P O R T S 4 Press or to choose your setting. If you choose 7 days, the screen prompts you to choose a day at which to begin the 7-day countdown. 5 When the screen displays the setting you want, press Set. 6 Enter the time to begin printing, in 24-hour format. (For example,
  • Brother International 8060P | Owners Manual - Page 92
    82 C H A P T E R T E N
  • Brother International 8060P | Owners Manual - Page 93
    83 CHAPTER ELEVEN Making Copies Using Your Machine as a Copier You can use your machine as a copy machine, making up to 99 copies at a time. The machine can stack the copies or collate (sort) them. (Example for FAX-8060P) The scannable area of your machine begins at approximately 4mm from the edge
  • Brother International 8060P | Owners Manual - Page 94
    . 1 Place the document in the feeder. 2 Press Photo/Text. The screen will display the default setting. DOC TYPE:AUTO SELECT {} & COPY TEXT Making Multiple Copies There are two ways to make multiple copies on your machine. You can choose whether the copies will be STACKED (all copies of page
  • Brother International 8060P | Owners Manual - Page 95
    in the feeder. 2 Press Enlarge/Reduce. 3 Press or to select AUTO, 200%, 150%, 125%, 120%, 100%, 93%, 87%, 75%, or 50%. 4 Press Copy when the screen displays your selection. 5 Enter the number (1-99) of copies you want. 6 Wait five seconds. --OR-- Press Copy again. 7 Press or to select STACK or SORT
  • Brother International 8060P | Owners Manual - Page 96
    86 C H A P T E R E L E V E N
  • Brother International 8060P | Owners Manual - Page 97
    and Computer to 87 Work Together (For MFC-9060 only) Before You Begin 1 Make sure you have an IEEE 1284 compliant, bi-directional parallel interface cable. 2 Disconnect the telephone line cord, then unplug the machine power cord from the electrical outlet before connecting the parallel interface
  • Brother International 8060P | Owners Manual - Page 98
    long. Connecting the machine to Your Computer IMPORTANT To install the software using machine, and secure with the wire clips. 2 Connect the interface cable to the printer port of your computer, and secure with the two screws. (To locate your computer's printer port, see your computer's user guide
  • Brother International 8060P | Owners Manual - Page 99
    socket, then switch on the PC. Your MFC-9060 is a 4-in-one multi-function center-it's a fax, copier, printer and scanner. Before you can print from Windows® on your PC, you must first install the printer driver that is included on CD-ROM. Installing the Brother Drivers Using Windows® 95, 98 and 98SE
  • Brother International 8060P | Owners Manual - Page 100
    90 C H A P T E R T W E L V E 2 Select (Recommended) and click Next. 3 Insert the CD-ROM into your CD-ROM drive. 4 Select Specify a location and remove the other check marks, then click Browse to locate the file. 5 Double-click on the CD icon and click on the "x:\eng\w9x\para" folder. (x: is the
  • Brother International 8060P | Owners Manual - Page 101
    UP THE MACHINE AND COMPUTER ( F O R M F C - 9 0 6 0 O N LY ) 91 6 Make sure Specify a location is selected and click Next. 7 Make sure your printer driver name appears in the dialog box, and click Next. 8 You can type a name for this printer, or you can use the name supplied on screen. When you
  • Brother International 8060P | Owners Manual - Page 102
    . When the Setup window appears, and the status bar reaches 100%, the remained drivers will be copied. 10 Click OK. All the drivers have been installed. Now you can print and scan. If you want to install MFL Pro, go to the section "Installing the Brother Software".
  • Brother International 8060P | Owners Manual - Page 103
    SETTING UP THE MACHINE AND COMPUTER ( F O R M F C - 9 0 6 0 O N LY ) 93 Installing the Brother Drivers Using Windows® 2000 Professional 1 When the Found New Hardware Wizard screen appears, click Next. 2 Select (Recommended) and click Next. 3 Insert the CD-ROM into your CD-ROM drive.
  • Brother International 8060P | Owners Manual - Page 104
    94 C H A P T E R T W E L V E 4 Select Specify a location and remove the other check marks, then click Next. 5 Click Browse to locate the file. 6 Double-click on the CD icon and click on the "x:\eng\w2k\para" folder, then click OK. ("x" is the drive letter for your CD-ROM drive.)
  • Brother International 8060P | Owners Manual - Page 105
    SETTING UP THE MACHINE AND COMPUTER ( F O R M F C - 9 0 6 0 O N LY ) 95 7 Click Next. 8 Click Finish.
  • Brother International 8060P | Owners Manual - Page 106
    96 C H A P T E R T W E L V E 9 Repeat Steps 1-8 several times for Brother drivers. You might see "Digital Signature Not Found" dialog during installation. If you see it, click Yes to install the driver. 10 Click Finish.
  • Brother International 8060P | Owners Manual - Page 107
    to the section "Installing the Brother Software". Installing the Brother Drivers Using Windows NT® Workstation Version 4.0 1 Windows NT® Workstation Version 4.0 does not have Plug & Play, so you will have to install the drivers manually. Click Start in the Task bar, and select Setting, Printer. Then
  • Brother International 8060P | Owners Manual - Page 108
    98 C H A P T E R T W E L V E 2 Select My Computer and click Next. 3 Select LPT1: and click Next. 4 Insert the CD-ROM into your CD-ROM drive. 5 Click the Have Disk...
  • Brother International 8060P | Owners Manual - Page 109
    SETTING UP THE MACHINE AND COMPUTER ( F O R M F C - 9 0 6 0 O N LY ) 99 6 Click Browse to locate the file. 7 Double-click the CD icon and click the "x:\eng\nt40" folder, then click Open. ("x" is the drive letter for your CD-ROM drive.) 8 Click OK.
  • Brother International 8060P | Owners Manual - Page 110
    100 C H A P T E R T W E L V E 9 Select your printer model, then click Next. This dialog may not be displayed on some MFC models. For some models, this step is not necessary. Proceed to Step 10. 10 Click Next. 11 Select Not Shared, then click Next.
  • Brother International 8060P | Owners Manual - Page 111
    101 S E T T I N G U P T H E M A C H I N E A N D C O M P U T E R ( F O R M F C - 9 0 6 0 O N LY ) 12 Select Yes (Recommended) to print a Test Page and click Finish. 13 After the test page has been printed, click Yes. Now the printer driver has been installed, and you can see it.
  • Brother International 8060P | Owners Manual - Page 112
    E R T W E L V E 14 To install the other drivers (such as the scanner), you will have to install them manually. Click Start in the task bar, then select Run. drivers have been installed. Now you can print and scan. If you want to install MFL Pro, go to the section "Installing the Brother Software".
  • Brother International 8060P | Owners Manual - Page 113
    O N LY ) Installing the Brother Software IMPORTANT You must install Printer and Scanner drivers before you install the software. (See Connecting the Brother Machine to Your Computer.) 1 Insert the Brother CD-ROM into your CD-ROM drive. The language Selection Screen appears. Click your language menu
  • Brother International 8060P | Owners Manual - Page 114
    Pro (Main Application): 1 Click the first button Install MFL-Pro. 2 Follow the instructions on the screen. ScanSoft® PaperPort® will be installed. After the installation, you must restart your PC. Clicking Install MFL-Pro, will install ScanSoft® PaperPort®, and ScanSoft® TextBridge® OCR applications
  • Brother International 8060P | Owners Manual - Page 115
    .com, where you will find additional information about Brother products and services, such as specification sheets and Frequently Asked Questions (FAQs), click Brother Home Page. Helpful Hints • The installer automatically sets the printer port to the parallel interface, BRMFC (for Windows® 95
  • Brother International 8060P | Owners Manual - Page 116
    106 C H A P T E R T W E L V E
  • Brother International 8060P | Owners Manual - Page 117
    the CD-ROM supplied with your machine. You can easily install them into your Windows® system using our installer program. The driver supports our unique compression mode to enhance printing speed in Windows® applications, and allows you to set various printer settings including economy printing mode
  • Brother International 8060P | Owners Manual - Page 118
    to print the next page automatically. When the machine finishes printing all data, it returns to online status. You may select the proper paper source, paper size, and orientation in your application software. If your application software does not support your custom paper size, select the next
  • Brother International 8060P | Owners Manual - Page 119
    . You do not have to choose manual feed in the Setup dialog box of your printer driver. Insert the sheet of paper guide of the manual feed slot to the width of the paper you're using. Paper Tray The machine ejects paper with printed surfaces face down into the paper tray at the front of the machine
  • Brother International 8060P | Owners Manual - Page 120
    4% to 6% by weight Smoothness 100 to 250 (Sheffield) 100 to 250 (Sheffield) Recommended paper types: Cut sheet: Xerox 4200 Label: Avery laser label or equivalent Transparency: 3M CG3300 for laser printers or equivalent Output Tray: Approx. 100 sheets of 75 g/m2 (20 lb) A4/Letter paper
  • Brother International 8060P | Owners Manual - Page 121
    14 111 CHAPTER FOURTEEN Using the Windows®- Based Brother Control Centre (For MFC-9060 only) Brother Control Centre The Brother Control Centre is a software utility that pops up on the PC screen whenever paper is placed in the ADF. This allows you to quite easily, with very few mouse clicks, access
  • Brother International 8060P | Owners Manual - Page 122
    112 C H A P T E R F O U R T E E N AutoLoad the Brother Control Centre The Control Centre is initially configured to automatically load each time Windows® is started. When the Control Centre is loaded the Control Centre
  • Brother International 8060P | Owners Manual - Page 123
    ( F O R M F C - 9 0 6 0 O N LY ) Using the Control Panel Keys Before you can use the Scan key on the control panel, you must have connected the MFC to your Windows®-based PC and loaded the appropriate Brother Drivers for your version of Windows®. When you are ready to use the Scan key, make sure the
  • Brother International 8060P | Owners Manual - Page 124
    select SCANNING:E-MAIL and press Set. The MFC will scan the original, create a file attachment, and launch your E-mail application, displaying the new message waiting to be addressed. Brother Control Centre Features Auto Configuration During the installation process the Control Centre checks your
  • Brother International 8060P | Owners Manual - Page 125
    driver for enhanced copy functions. You can scan the page on the Brother MFC and print the copies using any of the features of the Brother MFC printer driver-OR-you can direct the copy output to any standard Windows® printer driver installed on the PC. Two on One Copy-allows you to use the Two
  • Brother International 8060P | Owners Manual - Page 126
    116 C H A P T E R F O U R T E E N Global Settings AutoLoad Pop-Up-Click this checkbox if you want Brother MFL Control Centre to load when you boot your computer. Setting Up the Scanner Configurations The Pop-Up application stores eight different scanning modes. Each time you scan a document, you
  • Brother International 8060P | Owners Manual - Page 127
    C - 9 0 6 0 O N LY ) To Access the Scanner Configurations Screen: 1 Place the original in the ADF. 2 Right-click the appropriate Control Centre button to display the Configurations..., then click it. The configuration screen for that Control Centre button will appear. 3 To save your settings, press
  • Brother International 8060P | Owners Manual - Page 128
    P T E R F O U R T E E N Scanner Settings From the pull-down list, select the scanning mode that is -page PCX (*.DCX) Portable Network Graphics (*.PNG) JPEG Image Files (*.JPG) FlashPix (*.FPX) HFX Fax Files (*.HFX) To Search your system for the directory and folder you want, click the Browse...
  • Brother International 8060P | Owners Manual - Page 129
    119 U S I N G T H E W I N D O W S ® - B A S E D B R O T H E R C O N T R O L C E N T R E ( F O R M F C - 9 0 6 0 O N LY ) Scan to E-mail Scanner Settings From the pull-down list, select the scanning mode that is appropriate for the type of file: Filing and Copying; Text for OCR; Photos;
  • Brother International 8060P | Owners Manual - Page 130
    120 C H A P T E R F O U R T E E N File Attachments Do not convert files-Click this checkbox if you do not want to change the file type of attachments. The Conversion Options will not be available (grayed). Convert MAX files only-Click this checkbox if you want to convert only attachments that are
  • Brother International 8060P | Owners Manual - Page 131
    add to your list, click the User button, then click OK to return to the Link Preference window. From the Link Preference window, you can remove a name from the QuickSend list, highlight the name and clicking the Delete button. Scan to Word Processor Scanner Settings From the pull-down list, select
  • Brother International 8060P | Owners Manual - Page 132
    the word processor you want to use. Click the Link Settings... button to display a screen to set up a link to the version of OCR and document format that you want OCR if you want to use the OCR package that was installed with the Brother software. Click the OCR Settings... button to choose how the
  • Brother International 8060P | Owners Manual - Page 133
    O N T R O L C E N T R E ( F O R M F C - 9 0 6 0 O N LY ) User Defined Button Scanner Settings From the pull-down list, select the scanning mode that is appropriate for the type of file: Filing and Copying; Text for OCR; Photos; Up screen. Click the Custom Link Settings... button to set up
  • Brother International 8060P | Owners Manual - Page 134
    O U R T E E N Copy / Two on One Copy Scanner Settings From the pull-down list, select the scanning mode that is of the settings for that mode, click the Modify Settings... button. Copy Settings Brother MFL Pro Printer Copies-Enter the number of copies you want to print. To change the copy
  • Brother International 8060P | Owners Manual - Page 135
    Using ScanSoft™ PaperPort® for Brother and ScanSoft™ TextBridge® (For MFC-9060 only) ScanSoft™ Paper Port® for Brother is a document management the PaperPort® program group. The complete ScanSoft™ PaperPort® Owner's Manual, including ScanSoft™ TextBridge® OCR, is in the On-Line Documentation
  • Brother International 8060P | Owners Manual - Page 136
    ™ TextBridge Select Start, Settings, Control Panel, Add/Remove Programs and the Install/Uninstall tab. Select PaperPort® from the list and click the Add/ Remove button. Viewing Items in ScanSoft™ PaperPort® for Brother PaperPort® provides several ways to view items: Desktop View displays a thumbnail
  • Brother International 8060P | Owners Manual - Page 137
    does not automatically recognize one of the applications on your computer, you can manually create a link using the Create New Link command. (See PaperPort® Software by: ScanSoft™ TextBridge® OCR is automatically installed with PaperPort® when you install Multi-Function Link® Pro on your computer.
  • Brother International 8060P | Owners Manual - Page 138
    128 C H A P T E R F I F T E E N PaperPort® can quickly convert the text on a PaperPort® item (which is really just a picture of the text) into text that you can edit with a word processing application. PaperPort® uses the optical character recognition application ScanSoft™ TextBridge, which comes
  • Brother International 8060P | Owners Manual - Page 139
    the Scanner To choose the Brother Multi-Function Link® Pro as your scanner driver, select it under the "Select scanner"-OR-" the machine. 2 Adjust the following settings, if needed, in the Scanner Setup Scanner window. When scanning is completed, close the scanner window. The PaperPort® screen
  • Brother International 8060P | Owners Manual - Page 140
    R F I F T E E N Settings in the Scanner Window Image Resolution Resolution: Select the scanning resolution from the Resolution . Brightness Brightness: Adjusting the brightness settings to obtain the best image. The Brother Multi-Function Link® Pro offers 100 brightness settings (-50 to 50). The
  • Brother International 8060P | Owners Manual - Page 141
    210 mm.) • B5 (182 x 257 mm.) • Executive (7 1/4 x 10 1/2 in.) • Business Card (60 x 90 mm.) • Custom (User adjustable from 0.35 x 0.35 in. to 8.5 x 14 in.) After you select a custom size, you can adjust the scanning area further by using Insert document face down in document feeder of the machine.
  • Brother International 8060P | Owners Manual - Page 142
    portion of the document you wish to scan. 4 Place document in the document feeder of the machine again. 5 Adjust the settings for Resolution, Color Type (Gray Scale), Brightness, Contrast, and Size in the Scanner Setup window, as needed. 6 Select the Start button. This time only the selected area of
  • Brother International 8060P | Owners Manual - Page 143
    Instructions 1 Read all of these instructions. 2 Save them for later reference. 3 Follow all warnings and instructions should not be placed in a built-in installation unless proper ventilation is provided. 7 This machine that will block received faxes. Do not place anything in the path of received
  • Brother International 8060P | Owners Manual - Page 144
    machine must be quickly disconnected. 15 Unplug this product from the mains power and telephone line sockets, and refer servicing to qualified service when the operating instructions are followed. Adjust only those controls that are covered by the operating instructions. Improper adjustment of
  • Brother International 8060P | Owners Manual - Page 145
    1 LASER KLASSE 1 PRODUKT This machine has a Class 3B Laser Diode which emits invisible laser radiation in the Scanner Unit. The Scanner Unit should not be opened under any circumstances. Caution Use of controls, adjustments or performance of procedures other than those specified in this manual may
  • Brother International 8060P | Owners Manual - Page 146
    a qualified electrician. IEC 825 Laser Class CLASS 1 LASER PRODUCT. Disconnect device The equipment must be installed near the socket outlet which fuse cover. Never use a plug with the cover omitted. WARNING - THIS PRINTER MUST BE PROPERLY EARTHED. The wires in the mains cord are cololured in
  • Brother International 8060P | Owners Manual - Page 147
    17 137 CHAPTER SEVENTEEN Troubleshooting and Maintenance Troubleshooting Error Messages You may occasionally encounter a difficulty with your machine or telephone line. If this happens, your machine often identifies the problem and displays an error message. The list below explains the most common
  • Brother International 8060P | Owners Manual - Page 148
    "Document Jam" in this chapter. MACHINE ERROR XX Machine has a mechanical problem. Unplug the machine. Then contact your Brother dealer for service. MEMORY FULL (May occur when the fax machine is used as a printer.) The fax machine memory Unplug the fax machine and capacity has been exceeded
  • Brother International 8060P | Owners Manual - Page 149
    cannot reset itself and return to the date and time prompt, it will display MACHINE ERROR XX. Please call your Brother dealer for service. The recording paper is jammed in the machine. Do not pull the paper out until you see next page. Toner cartridge is not installed. Reinstall the toner
  • Brother International 8060P | Owners Manual - Page 150
    OK Printer Jam Before you can clear a paper jam error, you must find out where the paper is stuck. Use the diagram below to help locate the position of the paper. WARNING Do not force the jammed paper from the paper tray because you may damage the machine and cause toner to scatter
  • Brother International 8060P | Owners Manual - Page 151
    the top cover and check that a torn piece of paper does not remain inside the machine. Multi-purpose Sheet Feeder 2 Clearing a Paper Jam near the Drum Unit. If paper is jammed near the drum unit, open the top cover and remove the drum unit. Then, pull the jammed paper upwards and out of the
  • Brother International 8060P | Owners Manual - Page 152
    142 C H A P T E R S E V E N T E E N 3 Clearing a Paper Jam in the Fuser Unit. If paper is jammed in the fuser unit, open the top cover and remove the drum unit. Then, pull the jammed paper out of the fuser. Reinstall the drum unit and close the top cover. Paper is jammed in fuser unit
  • Brother International 8060P | Owners Manual - Page 153
    , or the sending party's fax scanner may be dirty. Clean your primary corona wire, or ask the sender to make a copy to see if the problem is with the sending machine. Try receiving from another fax machine. If the problem continues, call Brother dealer for service. Machine "hears" voice as CNG
  • Brother International 8060P | Owners Manual - Page 154
    Activation Code (default setting is 51). When your machine answers, hang up. The machine does not print. Make sure the machine is plugged in. The toner cartridge and drum unit are installed properly. The interface cable is securely connected between the machine and computer. Check to see if LCD is
  • Brother International 8060P | Owners Manual - Page 155
    unit with a new one. Faint lmages Printed pages are stained Clean the machine's interior and the primary corona wire of with toner or have vertical toner cartridge. See "Regular Maintenance" and "Cleaning stripes. the Drum Unit" in this chapter. Make sure that the tab of the corona wire is
  • Brother International 8060P | Owners Manual - Page 156
    , etc. may cause this condition to occur. Make sure the machine is placed on a flat, horizontal surface. Remove the drum unit with the toner cartridge installed. Try rocking them from side to side. You may clear a blurred page by wiping the scanner windows with a clean soft cloth. (See "Regular
  • Brother International 8060P | Owners Manual - Page 157
    cord and unplug the machine from the AC outlet. 2 Open the top cover. 3 Remove the drum unit assembly. WARNING Remove the drum unit and toner cartridge assembly. Leave the toner cartridge installed in the drum unit. Top Cover Drum Unit 4 Place the drum unit and toner cartridge assembly into the
  • Brother International 8060P | Owners Manual - Page 158
    , document tray, paper tray and pack them. 6 Wrap the machine in the plastic bag and place it in the original carton with the original packing material. 7 Place documents (manual and printed material) and the drum unit and toner cartridge assembly into the carton as shown below. 8 Close the carton
  • Brother International 8060P | Owners Manual - Page 159
    by cleaning it on a regular basis. It is a good idea to clean the drum unit during this routine. Avoid using thinners or other organic solvents to clean the machine and do not use water. Cleaning the Scanner 1 Unplug the telephone line and then the power cord. When you reconnect these lines
  • Brother International 8060P | Owners Manual - Page 160
    finger. s Handle the drum unit carefully as it contains toner. If toner scatters and your hands or clothes get dirty, immediately wipe or wash it off with cold water. Toner Sensor Gears Electric Terminal Scanner Window Sensor Strip WARNING After you have used the machine, some internal parts
  • Brother International 8060P | Owners Manual - Page 161
    scanner window and the toner sensor with a clean soft dry cloth. Do not use isopropyl alcohol to clean the scanner window or the toner sensor. Cleaning the Drum Unit We recommend you place the drum stripes. 4 Install the drum unit into the machine. See the section "Replacing the Drum Unit" in
  • Brother International 8060P | Owners Manual - Page 162
    not sure of them, consult with Brother dealer for service. Be sure to seal the toner cartridge tightly so toner powder does not spill out of the cartridge. When discarding used toner cartridges, keep them separate from domestic waste. It is recommended that you clean the machine when you replace the
  • Brother International 8060P | Owners Manual - Page 163
    . 2 Gently turn the lever on the toner cartridge forward until it stops. The toner cartridge cannot be removed unless the shutter is completely closed, by turning the lever fully to the front. Toner Cartridge Drum Unit 3 Remove the old toner cartridge from the drum unit by gently pulling it out.
  • Brother International 8060P | Owners Manual - Page 164
    Aluminium Bag Old Toner Cartridge WARNING s Wait to unpack the toner cartridge until immediately before you install it into the machine. If a toner cartridge is left unpacked for a long period of time, the toner life is shortened. s You can use only a genuine Brother toner cartridge (TN-200 series
  • Brother International 8060P | Owners Manual - Page 165
    six times. Toner Cartridge 6 Slide the new toner cartridge into the opening on the right side of the drum unit. To ensure that the toner cartridge and the drum unit fit together correctly, make sure that the toner cartridge guide bar is exactly aligned with the guide slot in the drum unit. Drum Unit
  • Brother International 8060P | Owners Manual - Page 166
    be replaced. You should clean the machine when you replace the drum unit. WARNING When removing the drum unit, handle carefully because it contains toner. When you replace the drum unit, you should clean the machine. The drum unit is a consumable, and it is necessary to replace it periodically
  • Brother International 8060P | Owners Manual - Page 167
    parts of the machine will be extremely HOT! So please be careful. HOT! Follow these steps to replace the drum unit: 1 Open the top cover. 2 Remove the old drum unit. Place the drum unit on an old cloth or large piece of disposable paper to avoid spilling and scattering the toner. Top Cover Drum Unit
  • Brother International 8060P | Owners Manual - Page 168
    unit and keep it in a safe place. For more information, see "Replacing the Toner Cartridge" in this chapter. Toner Cartridge Drum Unit Discard the used drum unit according to local regulations. Be sure to seal the drum unit tightly so toner powder does not spill out of the unit. When discarding used
  • Brother International 8060P | Owners Manual - Page 169
    to unpack the drum unit immediately before installing it into the machine. If an unpacked drum unit is subjected to excessive direct sunlight or room light, the unit may be damaged. s Handle the toner cartridge and the drum unit carefully because they contain toner. If toner scatters and your hands
  • Brother International 8060P | Owners Manual - Page 170
    E N T E E N 6 Reinstall the toner cartridge into the new drum unit. For more information, see "Replacing the Toner Cartridge" in this chapter. 7 Holding the new drum unit by the handles, install it. Close the top cover. Top Cover Drum Unit 8 The machine will automatically eject the starter sheet. Do
  • Brother International 8060P | Owners Manual - Page 171
    ) Laser Printer 64 levels (Dithered) LCD, 16 characters Standard, Secure, Delayed, Sequential Automatic/Light/Dark (manual setting) • Horizontal 8 dots/mm • Vertical Standard--3.85 lines/mm Fine, Photo--7.7 lines/mm Superfine, Photo (copy)--15.4 lines/mm 16 stations (8x2) (FAX-8060P) 8 stations (MFC
  • Brother International 8060P | Owners Manual - Page 172
    (For MFC-9060 only) Interface (For MFC-9060 only) Memory (For MFC-9060 only) Printer Method Resolution (For MFC-9060 only) Print Quality Print Speed (For MFC-9060 only) Print Media Windows® 95, 98, 98SE, 2000 professional and Windows NT® Workstation Version 4.0 driver supporting Brother Native
  • Brother International 8060P | Owners Manual - Page 173
    163 S P E C I F I C A T I O N S Electrical and Environment Temperature Warm-Up First Print Power Source Power Consumption Noise Humidity Dimensions Weight (Allowable) 10 - 32.5° C (50 - 90.5° F) (Storage) 3.3 - 40° C (38 - 104° F) Max. 1 minute at 23° C (73.4° F) 20 seconds (when loading Letter
  • Brother International 8060P | Owners Manual - Page 174
    164 C H A P T E R E I G H T E E N
  • Brother International 8060P | Owners Manual - Page 175
    caused by line noise or static. Coding Method Method of coding the information contained in a document. All fax machines must use a minimum standard of Modified Huffman (MH). Your machine is capable of greater compression methods, Modified Read (MR) and Modified Modified Read (MMR), if the receiving
  • Brother International 8060P | Owners Manual - Page 176
    your fax at a later time (up to 24 hours later). Drum unit A printing device for your machine. Dual Access Your machine can scan outgoing faxes or screen on the machine that shows interactive messages during On-Screen Programming and defaults to the date and time when the machine is idle. Manual fax
  • Brother International 8060P | Owners Manual - Page 177
    . Photo Mode A resolution setting that uses varying shades of grey for the best representation of photographs. Polling The process of a fax machine calling another fax machine to retrieve waiting fax messages. Pulse A form of dialling on a telephone line. Print reduction reduces the size of incoming
  • Brother International 8060P | Owners Manual - Page 178
    certain time, such as Delayed Fax or Delayed Polling Receive. Tone A form of dialling on the telephone line used for Touch Tone telephones. Toner cartridge An accessory that holds toner for the drum unit on Brother laser models. Toner Saver A process that causes less toner to be affixed to the page
  • Brother International 8060P | Owners Manual - Page 179
    57, 58 Call Reservation 57 Cancelling a Job 63 Cleaning the Drum Unit 151 Cleaning the Printer 150 Cleaning the Scanner 149 Clock Change 32 Connecting 13 Connecting (Parallel Cable 88 Contrast 50 Control Panel (FAX-8060P 4 Control Panel (MFC-9060 6 Copy 83 Copy (Enlarging or Reducing 85
  • Brother International 8060P | Owners Manual - Page 180
    List 1 I Inserting Spaces 30 Installation 9 International Call 57 Interrupting 64 J Jam 140 Journal 79 Journal Period 80 L List of Stored Telephone Numbers 79 Loading Paper 15 M Maintenance 149 Manual Dialling 69 Manual Feed Slot 109 Manual Mode 37 Manual Transmission 51 MEMORY FULL
  • Brother International 8060P | Owners Manual - Page 181
    85 Station ID 28 Storing Telephone Numbers 65 System Setup List 79 T TAD Mode 38 Telephone Answering Device (TAD) ....... 19 Timer 59 Tone/Pulse 27 Toner Cartridge (Replacing 152 Toner Save 42 Transmission Verification Report 80 Troubleshooting 137 I N D E X 171
  • Brother International 8060P | Owners Manual - Page 182
    172 I N D E X
  • Brother International 8060P | Owners Manual - Page 183
    173 Accessory List Model Name Laser Fax Toner Laser Fax Drum Description TN-200 DR-200 Change Answer Mode Press 9 8 then for TAD, press 1. Fax/Tel (F/T), press 2. Fax, press 3. Exit Remote Operation Press 9 0. Change Remote Access Code 1 Press Menu, 8, 3. 2 Enter the 3-digit number. The 3
  • Brother International 8060P | Owners Manual - Page 184
    and then press # #. Press 9 6 1 after two short beeps, then enter the number of remote fax machine, and then # # to retrieve Memory Status List. Turn Fax Storage on press 6. Turn Fax Storage off press 7. 2 Retrieve a Fax Press 9 6 then to Print a Memory Status List press 1, then enter the number of
  • Brother International 8060P | Owners Manual - Page 185
    House, 1 Tame Street, Audenshaw, Manchester, M34 5JE, UK. Herewith declare that: Products description : Brother Fax Machines Type : Group 3 Laser Model Name : FAX-8060P / MFC-9060 Are in conformity with provisions of the R & TTE DIRECTIVE (99/5/EC) Standards applied: Harmonized : Safety
  • Brother International 8060P | Owners Manual - Page 186
    ® This machine is approved for use in the country of purchase only, local Brother companies or their dealers will only support fax machines purchased in their own countries. UK/IRE LH0511004 Printed in China
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
®
FAX-8060P
MFC-9060
OWNER’S MANUAL