Brother International 8060P Owners Manual - Page 44
Using TX Lock, Setting Up the TX Lock for the First Time
View all Brother International 8060P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
34 C H A P T E R F O U R Using TX Lock You must use a password to switch TX Lock ON and OFF. Setting Up the TX Lock for the First Time 1 Press Menu, 0, 1. The screen prompts you to enter the password, and then press Set. NEW PASSWD:XXXX ENTER & SET 2 Enter a 4-digit number as a new password. 3 Press Set. The screen prompts you re-enter the password. VERIFY:XXXX ENTER & SET 4 Re-enter the password and press Set. 5 The screen displays SET TX LOCK SET PASSWORD 6 Press or to choose SET TX LOCK. 7 Press Set. The screen prompts you to enter the password. PASSWORD:XXXX ENTER & SET 8 Enter a 4-digit password, followed by Set. This is the same as the security password of your machine already stored. The screen displays ACCEPTED for 2 seconds, followed by TX LOCK MODE - TX Lock is now switched ON. If the password you enter at Step 8 is incorrect, the screen would display WRONG PASSWORD. After 2 seconds the display will then return to normal (displaying the date & time). You must then start from Step 1 to set TX Lock.