Brother International 9840CDW Quick Setup Guide - English - Page 43
No Authentication with WEP Encryption, Authentication with WPA/WPA2-PSK
UPC - 012502618744
View all Brother International 9840CDW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Installing the Driver & Software Macintosh® 2 Plug the AC power cord into an AC outlet. Turn the power switch on. Improper Setup If you have previously configured the wireless settings of the machine you must reset the network (LAN) settings before you can configure the wireless settings again. Press Menu, 7, 2, 5 (or Menu, 7, 0) and then press 1 to accept the change. 3 On your machine, press Menu, 7, 2, 2. 72.WLAN WLAN Enable ? a On b Off Select ab or OK Press or to choose On, then press OK. The wired network interface will become inactive with this setting. 4 The machine will search for your network and display a list of available SSIDs. You should see the SSID you wrote down earlier. If the machine finds more than one network use the or keys to choose your network, then press OK. Go to step 8. 72.WLAN SSID a salesgroup b ABCgroup Select ab or OK Note It will take several seconds to display a list of available SSIDs. If your access point is set to not broadcast the SSID you will have to manually add the SSID name. Go to step 5. 5 Select using or and press OK. Go to step 6. 72.WLAN SSID Select ab or OK 6 Enter a new SSID and press OK. For information how to type text, see Entering text on page 48. 72.WLAN SSID: Enter & OK Key 7 Press or to choose Infrastructure, then press OK. 8 Use the , and OK keys to choose one of the options below: If your network is configured for Authentication and Encryption you must match the settings used for your network. No Authentication or Encryption: Choose Open System, press OK then choose None for Encryption Type and press OK. Then press or to choose 1.Yes and press OK to apply your settings. Go to step 12. No Authentication with WEP Encryption: Choose Open System, press OK then use the or to choose WEP for the Encryption Type and press OK. Go to step 9. Authentication with WEP Encryption: Choose Shared Key, press OK. Go to step 9. Authentication with WPA/WPA2-PSK (TKIP or AES Encryption): Choose WPA/WPA2-PSK, press OK. Go to step 10. Authentication with LEAP: Choose LEAP, press OK. Go to step 11. Macintosh® Wireless Network 41