Brother International 9840CDW Quick Setup Guide - English - Page 49

Web Based Management (web browser), Restoring the network settings to factory default, admin, access - default admin password

Page 49 highlights

For Network Users Web Based Management 3 (web browser) The Brother print server is equipped with a web server that allows you to monitor its status or change some of its configuration settings, using HTTP (Hyper Text Transfer Protocol). Note • The User Name is 'admin' and the default password is 'access'. You can use a web browser to change this password. • We recommend Microsoft Internet Explorer 6.0® (or higher) or Firefox® 1.0 (or higher) for Windows® and Safari™ 1.0 for Macintosh®. Please also make sure that JavaScript and cookies are always enabled in whichever browser you use. We recommend you upgrade to Safari™ 1.2 or higher to enable JavaScript. To use a web browser, you will need to know the IP address of the print server. 1 Open your browser. 2 Type http:// printer_ip_address /into your browser (Where "printer_ip_address" is the IP address of the printer or the print server name). „ For example http://192.168.1.2/ Restoring the network 4 settings to factory default To restore all network settings of the internal Print/Scan server to factory default, please follow the steps below. 1 Make sure the machine is not in use, then disconnect all the cables from the machine (except power cable). 2 Press Menu, 7, 0. 3 Press 1 to select Reset. 4 Press 1 to select Yes. 5 The machine will restart. Re-connect cables once this is complete. See Chapter 2 of the Network User's Guide. 47

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53

For Network Users
47
3
Web Based Management
(web browser)
The Brother print server is equipped with a web server
that allows you to monitor its status or change some
of its configuration settings, using HTTP (Hyper Text
Transfer Protocol).
Note
The User Name is ‘
admin
’ and the default
password is ‘
access
’. You can use a web
browser to change this password.
We recommend Microsoft Internet Explorer
6.0
®
(or higher) or Firefox
®
1.0 (or higher) for
Windows
®
and Safari™ 1.0 for Macintosh
®
.
Please also make sure that JavaScript and
cookies are always enabled in whichever
browser you use. We recommend you upgrade
to Safari™ 1.2 or higher to enable JavaScript.
To use a web browser, you will need to know
the IP address of the print server.
1
Open your browser.
2
Type http:// printer_ip_address /into your
browser (Where “printer_ip_address” is the IP
address of the printer or the print server name).
For example http://192.168.1.2/
See Chapter 2 of the Network User's Guide.
4
Restoring the network
settings to factory default
To restore all network settings of the internal
Print/Scan server to factory default, please follow the
steps below.
1
Make sure the machine is not in use, then
disconnect all the cables from the machine
(except power cable).
2
Press
Menu
,
7
,
0
.
3
Press
1
to select
Reset
.
4
Press
1
to select
Yes
.
5
The machine will restart. Re-connect cables
once this is complete.