Brother International ADS-2800W Network Users Guide - Page 64
Con the Scan to E-mail Server Settings, Before Scanning to E-mail Server
View all Brother International ADS-2800W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Scan to E-mail Server (ADS-2800W / ADS-3600W) Configure the Scan to E-mail Server Settings 5 Before using the Scan to E-mail Server function, you must configure your Brother machine to communicate with your network and your email server. You can configure these items using Web Based Management, Remote Setup, or BRAdmin Professional 3. You must ensure that the following items are configured on your machine: IP address (If you are already using your machine on your network, the machine's IP address has been configured correctly.) Email address SMTP server address/port/Authentication method/Encryption method/Server Certificate Verification SMTP-AUTH Account Name and password 5 If you are unsure of any of these items, contact your network administrator. NOTE Although you must configure an email address on your machine, the machine does not have an email receiving function. Therefore, if the recipient replies to an email sent from your machine, the machine cannot receive it. Before Scanning to E-mail Server 5 You may have to configure the following items (using Web Based Management or Remote Setup): Sender Subject Size Limit Notification (for more information, see Transmission (TX) Verification Mail on page 62.) 60