Brother International BAS-364E Instruction Manual - English - Page 17
Adjusting the air pressure
View all Brother International BAS-364E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Chapter 3 INSTALLATION 14. Adjusting the air pressure w r 1. Air pressure should be 0.5 MPa. The air pressure can be adjusted by pulling up and turning the control knob w on the integrator q. After adjustment is complete, push the control knob w downward to lock it. 2. If water stands in the bottle of the integrator q, turn the drain cock e in the direction indicated by an arrow to drain the water. Note Open the air cock r slowly. q e BAS-364E, 366E, 370E, 375E 11
11
BAS-364E, 366E, 370E, 375E
Chapter 3
INSTALLATION
14. Adjusting the air pressure
1. Air pressure should be 0.5 MPa.
The air pressure can be adjusted by pulling up and
turning the control knob
w
on the integrator
q
.
After adjustment is complete, push the control knob
w
downward to lock it.
2. If water stands in the bottle of the integrator
q
, turn
the drain cock
e
in the direction indicated by an arrow
to drain the water.
Note
Open the air cock
r
slowly.
w
r
q
e