Brother International BAS-364E Instruction Manual - English - Page 35
Using the bobbin thread counter
View all Brother International BAS-364E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Chapter 5 OPERATING PROCEDURE 10. Using the bobbin thread counter Set the bobbin thread counter to display number of pieces of the selected pattern which can be sewn with the amount of thread on the bobbin to avoid running out of bobbin thread in the middle of a pattern. t series !3 !4 !0 y !2 !7 1. Press the MENU switch y until the B.T. COUNTER indicator !0 illuminates. 2. While pressing the STEP BACK switch !,7 turn the dial !2 to set the number of articles to be embroidered. q The bobbin thread counter can be set to any number from to . If the counter is set to , sewing continues irrespective of the amount of bobbin thread remaining. 3. Insert the floppy disk and press the B. T SET switch !.3 An alarm will beep twice. This willrecord the number of work pieces shown in the counter t to the disk. 4. The number shown in the counter t will decrease one each time the stitch pattern is completed. When the number of patterns shown in the counter is sewn, the counter t will red , and an alarm will sound. (The sewing machine will not start even if the start switch is pressed.) 5. Press the bobbin thread change switch !4 and replace the bobbin. The alarm will stop, and the number of work pieces set in step 3 will be displayed again in the counter t. BAS-364E, 366E, 370E, 375E 29