Brother International BAS-366E Programmer Instruction Manual - English - Page 138
when the needle point is at point A of the, Input the stitch length and press
View all Brother International BAS-366E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
Ending program 1. Press P . Zigzag stitch Zigzag width Stitch length Chaprter 3 Programming with Command Function Zigzag stitch is programmed. The example in the left is used for explanation of even width of zigzag stitch on the sewing path. Zigzag with curves may be programmed. Programming 1. Press P . The work clamp moves to the home position and the programmer screen is displayed. 2. Move the work clamp with . Press L when the needle point is at point A of the pattern. The first stitch (point A) is programmed. 3. Press 7 3 0 and press M . 7 is the command for the zigzag stitch. Input the width of the zigzag stitch in . 3.0 mm is input in the example. 4. Input the stitch length and press M . 3.0 mm is input in the example. Input 030 to make the stitch length to 3.0 mm. 5. Move the work clamp with . Press 7 8 9 L when the needle point is at point B of the pattern. Zigzag stitch with even width to the left and the right is programmed. Programmer 137