Brother International BAS-611 Instruction Manual - English - Page 34
Sensor, Sensitivity, Adjustment
View all Brother International BAS-611 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
FLAP SENSOR SENSITIVITY ADJUSTMENT (BAS-611, BAS-612) 1. Set MODE selector 0 to PROGRAM and set the seam length to 190 mm. 2. Set MODE selector 0 to MANUAL. 3. Position the material so as not to cause wear to the rubber cushion on the back of the carriage feed. 4. Press start switch 0 . Flap sensors 0 (both right and left) will start monitoring after the carriage feed is moved to the sewing start position. 5. Move the carriage feed forward by hand from where it stopped to where sensor window 0 is positioned under sensor 0 . Adjust the sensitivity as described under "Sensitivity adjustments" on the next page. 6. Move the carriage feed from position A to B (the full length of the sensor window) by hand and make sure that FLAP SENSOR indicators 0 and 0 do not illuminate. 7. When adjustment is completed, press EMERGENCY STOP switch 0 . The carriage feed will return to the home position. MODE AUTOMATIC MANUAL • PROGRAM • KNIFE CHANGE & CYCLE PGM. rt - SEAM BOBBIN `,--"•LENGTH COUNTER SET I I- I (a l I a l Li M/M ›. E SET EMERGENCY STOP BOBBIN COUNTER SET 0 LEFT RIGHT B A -30-