Brother International BAS-612 Instruction Manual - English - Page 11
Lubrication
View all Brother International BAS-612 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
5. Adjusting the air pressure O Open Close 1. The standard operating air pressure is 5 kg/cm2. Adjust the air pressure by turning handle 2. If water collects in bottle 0 close air cock 0 and then turn drain cock 0 slowly in the arrowed direction to drain the water. * Be sure to close drain cock 0 after letting the water out. .0 4 LUBRICATION [1] • Use Brother-specified machine oil (High White #70). < Standard lubrication > 1. Filling the arm top oil tank 2. Adjusting the rotary hook lubrication Line -o • Pour in the oil through oil cap 0 until its level reaches the upper line on oil gauge window@ • Replenish the oil when its level reaches the lower line. C More lubricant Less lubricant * To prevent extremely high oil consumption, be careful not to loosen lubrication adjustment screws @ for the rotary hook too much. Slide the carriage feed while referring to page 10, remove the slide plate, and tilt the machine head.